1
cpu reboot helpview story

http://hardforum.com – Hi guys, My rig has been fine up until today, and it started turning off randomly. No BSOD or freeze, just turns off and restarts. My build for reference : http://www.overclock.net/t/1548834/f...ve-vote-for-me The length of time it stay on is anywhere from a few seconds(before windows) or many minutes, running prime95. When i lay my case flat it always shuts off in 1 second, forming (Hardware)

1
Broken SATA connector :/view story

http://hardforum.com – So I have an old SSD which I recently took out of my rig during a case swap and the cable came out with the plastic around the SATA connector still inside. Also not sure if this is normal two pins seem a bit shoved in. What would be my best option to repair it since the internals are still good? Here's some pics (Hardware)

1
Helpview story

http://hardforum.com – Hello, First off, sorry for the lame thread title, I accidentally hit enter before finishing the post. Is there a way to change it? Either way, I need some help building a new PC. The last one I built was back in 2008 and suffice to say, it doesn't work much anymore. (Hardware)

1
Is there any reason to get 5/8 over 3/8 when buying fittings.view story

http://www.overclock.net –  "I have picked most of the parts for my new loop but am not to sure on the fittings...." (Hardware)

1
Setup website for home which works Offline (No Internet)view story

http://superuser.com – Problem: We know that though we don't have internet, we can access and set router configuration via http://192.168.0.1 (similar) IP. Now i want to know that can i set my website accessible same as http://192.168.0.1 links which work offline? and if yes then please guide how? Thank you. (HowTos)

1
2x OPO Invitesview story

http://www.overclock.net –  "I have two OPO 64GB Sandstone Black invites. Expires in a day. Grab 'em while you can...." (Hardware)

1
[Build Log] My Titanic Hadronview story

http://www.overclock.net –  "Hello Overclockers! This will be my first post, and my first build ever. I needed a..." (Hardware)

1
Steam PTT not working in Dirt 3, turning volume down mutes teamspeak. !!!view story

http://www.overclock.net –  "OK this is starting to annoy the crap out of me to no end. Dirt 3 just got ported over..." (Hardware)

1
Sumifs function where I want to sum a range not just a single row or columnview story

http://superuser.com – I am stuck. I am entering timesheet date into an excel sheet: Column A - Resource Name Column B - Project Phase Column C - Resource Team... Column D to AAA is a date Therefore a single resource could have multiple records as they work across multiple Project Phases and Resource terams. I want to create a table that summarises total timesheet days by: Prolect Phase and Resource Group on the verti (HowTos)

1
VirtualBox bridged adapter not working with one networkview story

http://superuser.com – I have been using VirtualBox bridged adapter with some networks and it has worked right. But a few days ago I have tried it with a new network and this time it has not worked. The only difference in this network, is that I need a username and a password to connect to it (not only the password). (HowTos)

1
what could cause such blurry text at 2560x1600?view story

http://hardforum.com – My friend has a HP Z30i that can support 2560x1600 at 60Hz the embedded video card is doing 1920x1200 So I first upgrade to an old Nvidia Quadrdo FX370, it supports 2560x1600 just fine, but the text is very blur So I then switch to a Nvidia FeForece 8600GT, once again, it can do 2560x1600, but the text is blur, and when I open a small windows like the Advance setting tab under Display ada (Hardware)

1
Keyboard shortcut to extend to 2nd monitor in vmplayer?view story

http://superuser.com – I am using Vmware player and my host OS is Windows 8 (guest OS is Lubuntu 14.04). I removed the top bar of my VMplayer because I found it annoying. I did this by going into C:\Users\{your_username}\AppData\Roaming\VMware\preferences.ini and then adding pref.vmplayer.fullscreen.nobar = 1 at the end of the file. (HowTos)