6

ZTE AC2627 USB MODEM not working in fedora 9

view full story
linux-howto

http://www.linuxquestions.org – Hi, I have no luck in configuring zte ac2627 so for, have searched many threads but no luck yet. need your help. thanks in advance Code: [root@Wazirkutz ~]# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 006: ID 19d2:fff5 ONDA Communication S.p.A. Bus 004 Device 002: ID 15d9:0a33  Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub [root@Wazirkutz ~]# Then i do "usb_modeswitch" conf is: Code: DefaultVendor=  0x19d2 DefaultProduct= 0xfff5 TargetVendor=  0x19d2 TargetProduct=  0xfff1 MessageEndpoint=0x0a MessageContent="5553424312345678c00000008000069f030000000000000000000000000000" Code: [root@Wazirkutz ~]# usb_modeswitch  * usb_modeswitch: tool for controlling "flip flop" mode USB devices  * Version 0.9.4 (C) Josua Dietze 2008  * Works with libusb 0.1.12 and probably other versions Looking for target devices  No target device found Looking for default devices  Found default devices (1) Prepare switching, accessing latest device Looking for active default driver to detach it  OK, driver found ("usb-storage")  OK, Driver "usb-storage" successfully detached Setting up communication with device Trying to send the message  OK, message successfully sent. -> See /proc/bus/usb/devices (or call lsusb) for changes. Bye Now i can see change Code: [root@Wazirkutz ~]# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 006: ID 19d2:fff1 ONDA Communication S.p.A. Bus 004 Device 002: ID 15d9:0a33 wvdialconf /etc/wvdial.conf Code: [root@Wazirkutz ~]# wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1  S2  S3  USB0 Sorry, no modem was detected!  Is it in use by another program? Did you configure it properly with setserial? Please read the FAQ at http://open.nit.ca/wiki/?WvDial If you still have problems, send mail to <[email protected]>. still no ttyUSB0 in /dev/ thanks in advance (HowTos)