11

Wireless doesn't work (Intel Advanced-N 6205)

view full story
linux-howto

http://crunchbanglinux.org – I installed #! a few days ago and it's been working great, except for one thing. I can't get the wireless to work. I have a wired connection that works fine. My wireless card is an Intel Advanced-N 6205. I did some searching and it looked like the iwlwifi package should support my card, but i still don't have wireless capabilities. I'm new to #! so i could just be missing something really obvious, but any help would be greatly appreciated :D (HowTos)

ziyi's picture
Submitted by ziyi on 02/15/2012 – Made popular on 02/15/2012

Stories similar to Wireless doesn't work (Intel Advanced-N 6205)

Hi guys, after almost one night looking to every different kind of websites/forums and so on, I'm stuck on configuring the wireless on this laptop.

I installed debian squeeze, basic, with no GUI because I don't need it for the purpose of this linux box.

I find out that the wireless card is:

03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)

Installed

Hi Everyone,I've previously had #! running on Lenovo T400 with no problems and loved it.

Hello,

I am unable to make Wifi work on my Ubuntu laptop.

Here is the relevant info:

1 ) Machine Brand and Model (PC/Laptop): Laptop HP EliteBook 8460p

2 ) Wireless Brand, Model and Wireless Chipset:

Code: $ lspci -nn | grep -i Net 25:00.0 Network controller [0280]: Intel Corporation Device [8086:0085] (rev 34) Intel Centrino Advanced-N 6205

3 ) check interface:

Code: $ ifconfig et

Intel wireless issues 28 weeks 5 hours ago

New to Crunchbang here, installed Waldorf about two weeks ago.Everything seemed to work out of the box just fine, then one day the wireless began to randomly disconnect. Sometimes I could reconnect but the signal was weak and wouldn't stay connected for more then 30 seconds.The wireless card I'm using is the Intel Centrino Wireless N-1000.

Hey,

I just can't connect to a wirless Network using the build in networkdevice. The Networkmanger shows "device not manged". It has been connected to the network during the setup prozess.

Another usb Wirlesscard is working perfect (curently pluged in under wlan1) but I want to use the buildin.

Here are some Information's.

Intel Wireless 6250 34 weeks 5 days ago

Hi,Recently I installed Arch Linux on my Thinkpad X220, and everything seems to be fine hardware-wise, except the fact that my WiFi card (Intel Wireless-N 6250) cannot connect at wireless-N speeds.

My dual boot Laptop (Laptop VPCF117HG) has a Intel Centrino Advanced-N 6200 wireless card. Unfortunately in Ubuntu the card functions erratically at best. Sometimes it works but mostly it doesn't. Even when it works it frequently freezes or works very slow. Searching through forums it seems that many 6200 and intel wireless users face the same problem as me.

I haven't yet found a solution.

ok i recently got a Alienware M17x with the default wireless card which is a intel® centrino® wireless-n 2230 and i have tried the suggest actions by other earlier card versions with no success i have internet with windows if need any help is appreciated and thanks in advanced

Hi all,I've been fiddling around with Crunchbang for a bit, and it seems pretty good. I'd love to be able to use it, but I can't get my Intel N 1030 wireless card to work.I downloaded iwlwifi-6000g2b-6.ucode off intellinuxwireless.org, because that's the driver that's supposed to make my wireless card work. But I have no idea how to install it. Can anyone help me?