I'm wondering if I've found a bug in ifupdown, but I wanted to ask here before reporting a bug:
/etc/network/if-up.d/upstart seems to fail to emit static-network-up if any virtual interfaces are defined.
Hi there,
I am new ubuntu user. I have tried to configure wireless usb adapter on my 9.10 desktop. Adapter did worked fine, but I have problems with wired connection now:
I can ping my router. Skype works fine (don`t need DNS), internet on virtual machine (winXP) works too.
THis is CAT of interfaces:
After last upgrade of 12.04 my network manager applet disappeared.
I'm using Ubuntu 12.10 with Gnome 3.6 on a brand-new Samsung NP900X4C.
The installer detected the wireless adapter, took in the SSID and WPA passphrase, wrote these into /etc/network/interfaces and connected perfectly.
Once installation was finished I wanted to switch to using NetworkManager to manage the wireless adapter, since this is much more convenient than fiddling with /etc/network/interf
Hi All,
I have 2 NICs in my U9.04 Server box (eth0, eth1). After I added 2 virtual interfaces for each physical interface (eth0:1,eth0:2,eth1:1,eth1:2), the MAC addresses of all the interfaces have changed to that of eth0. Because eth1 was configured to be on my local network, I can't access the box remotely anymore.
Have a 'new' mailserver running postfix on Ubuntu.
We are having some problems configuring the subnets & interfaces.
Basically 2 subnets (.253. & .254.) need to be connected through the 3rd subnet (.252.) where the Router is residing.
# This file describes the network interfaces available on your system
# and how to activate them.
I have to gigabit network interfaces which I have bridged.
/etc/network/interfaces is:
auto lo
iface lo inet loopback
# Set up interfaces manually, avoiding conflicts with, e.g., network manager
iface eth0 inet manual
iface eth1 inet manual
# Bridge setup
auto br0
iface br0 inet static
bridge_ports eth0 eth1
address 192.168.88.2
broadcast 192.168.88.255
netmask 255.255.
im in need of some help trying to configure multiple vlans on my ubuntu desktop.
we have several huawai ma5600t machines that need to be configured by downloading their config trough a tftp server. i currently have a switch configured with 4 vlans and a ubuntu desktop with the same amount of vlans.
the /etc/network/interfaces file looks like this:
I have 3 network cards installed in my ubuntu 10.04 server and I want to configure Internet sharing and file sharing on eth1 for wired users and wlan0 for wireless users.
Static ip:
eth0: 192.168.1.1
eth1: 10.0.0.15
wlan0: 10.0.0.20
/etc/network/interfaces
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 19
Email this page
