I'm working on building a custom PC, and I've run into a problem. I have an ASRock B75 Pro 3 motherboard and a Nvidia GeForce GTX 660 video card.
After I installed everything (correctly, as far as I know, but I could be wrong, since this is my first build), including the video card. When I powered it on, with an HDMI cable from the monitor to the video card I didn't get any display.
I am trying to learn about Solaris and Sun systems so I purchased a SunFire 280r running Solaris 9 with a disk array from eBay. The system had no video card so I purchased a PGX32 card for the PCI slot and installed it.
The problem is I have no video what so ever. I am familiar to the x86 world where I would expect at least a POST from a new video card.
Hi everyone. I just put together a new build and I'm having an issue. When I power on, all the fans start spinning including on the video card. After about 20 seconds though it appears the system shuts down and then starts up again. After another 20 seconds it happens again and it is a continual process.
I want to install a video card into a server. When it is inserted, server does not boot up and there is no video signal coming from video card. 4 LEDs at the back of the motherboard show pattern G-R-R-A which means "Disabling the console controller" (see Appendix C in manual). There was another (older) video card in that PCI slot and it worked fine.
I installed Ubuntu 12.10 64 bit in my Dell N5110 and i had a major problem my screen flashes all the time especially
when i open mozilla and other applications ,i get a message "Gpu Hang",what can i do about that?
Video Card - Mobile Intel(R) HD Graphics
Vendor Name Intel Corporation
Video Card Chip Type Intel(R) HD Graphics Family
Video Card Memory 2.77