6

Using debootstrap to install a foreign system (X86 to ARM)

view full story
linux-howto

http://www.linuxquestions.org – Hi all! At work they gave me the following task (and i need some help from you guys!): At work we have a normal PC running Ubuntu 9.10 (32-bit), which works good. We also have a LaCie Ethernet Disk Mini v2, which runs embedded Linux (RedHat), but is so trimmed down, you can't use the disk we would like to use it. The task is this: On the X86 machine, make a bootable image for the ARM architecture and write it to a harddisk (which fits the LaCie offc.) so it can boot off it. Now i have done some investigation, but don't know how to combine it all: - I can use debootstrap to create a minimal Debian system, but there comes the problem, you can't chroot into a foreign created system (i.e. X86 cannot chroot into ARM system). - I can use QEMU, which can emulate a ARM processor, but can i use the image that QEMU uses as a normal image for a harddisk, so it would boot off it (when using dd to write it to a real harddisk)? - Current kernels support the LaCie hardware (Marvell chipset) - I know how to use tools such as dd, so if the image is generated i can write it to disk and have the LaCie boot from it. The LaCie box has the following: 1 ARM9 ARMv5TEJ (266 MHz) CPU with 64 Mb RAM, Gigabit network controller and 1 usb host port, internal there is a sata port obviously. The only thing i want at the moment is to have the LaCie boot Debian and i can SSH into it, from there the rest is easy as pie. Is someone willing to help me accomplish this task? It would seriously mean and help alot! If all goes well and if i get all things up and running i would like to make a Howto of it and place that here, maybe it will be of some use :)! (HowTos)