Please, how to make a new label for usb flashdisc? In device notifier (KDE4) is always only Volume (vfat) and it is not very comfortable for me. Thanks for suggestions.
on 01/07/2010 – Made popular on 01/07/2010
i'am running live linux, which run from FAT32 flashdisk
since i run a lot of pc using this flashdisk, its difficult to identify which IP for its hostname, since its ip need to be dynamically determined by dhcp, so i want set their hostname by volume label that is set on its flasdisk
i can use blkid | grep sda1 or blkid | grep "vfat"
* -fstype=vfat,sync,uid=1000 :/dev/sd&Assuming auto.master has specified the base folder /media, the above works to put /dev/sdb1 into /media/b1 and so on and so forth (/dev/sdb8 into /media/b8).However, I'd like to be able to do something similar but using the labels (/dev/disk/by-label).
PARTLABEL should fix your problem though. I'm not sure (still learning about EFI here too!) whether LABEL is supported on gpt/fstab.Can you test:# gdisk -l /dev/sdX
# fatlabel /dev/sdX1(replace X as appropriate)that will tell you the values for PARTLABEL, and LABEL; which might help narrow it down
i had surfed around on diffrend chiness sites and found a rom i would like to test, if the test going good i will upload it for you, but i dont know about it is for hboot 1.25 or 1.28 but if i look in vold.fstab it look like this :
I have succesfully cross compiled QT-x11-3.3.8b for Imx6 linux but some time label are not painted for example the demo that cursor (show all type of cursor name) have only the box around the label and the label are blank. In other demo label are painted correctly. Any suggestions ?
tahnks in advance