1

[ubuntu] Zoom 5001 PCI Cable Modem

view story
linux-howto

http://ubuntuforums.org – I have a Zoom 5001 PCI Cable Modem that I am trying to get working correctly with Ubuntu 10.04.4 LTS (Server). It is currently working only partially with the tulip module as it is seen as a Conexant Lanfinity HCF Modem, so I am trying to port the old proprietary driver (Available at Zoom's 5001 Driver Page.), however the makefile is incorrect for modern ubuntu systems. I say only partially working because (using the default tulip driver) it will connect and configure via dhcp, and traffic flows for only a few seconds, then the card seems to lose the connection and proceeds to renegotiate or (Hardware)

dayu's picture
Submitted by dayu on 05/30/2012

Stories similar to [ubuntu] Zoom 5001 PCI Cable Modem

Hi,

OpenSUSE 11.1; kernel 2.6.31.12-0.2-default

Tried to configure via: Zoom CD driver: 1.06_k2.6.22.17_01_default-1suse.i586.rpm linuxant driver: dgcmodem-1.13_k2.6.31.5_0.1_pae-1suse.i586.rpm

Used Yast2 & ,also, command line rpm i ..., in su mode

Doesn't create /dev/ttyACM0 nor any /dev/ttyx

Hi,I have ADSL Modem Huawei SmartAX MT882 which has Ethernet as well as USB cable to connect internet.  For so long I have been using this Modem using Ethernet cable.

How do I install drivers for my HCF Conexant modem in Ubuntu 11.10?

Unfortunately Conexant driver is old with no update for new kernel version (upper 2.6) so I cant install and use my HCF modem.

I tried to compile it but when I want to configure it I have error! How should I compile and configure this driver with a newer kernel?

I'm trying to set up a USB Fax Modem in Ubuntu through Virtual Box but I'm not sure how to do so. My goal is to be able to dial out to a phone and have the phone ring.

Host OS = Mac OS X Virtual Box Guest OS = Ubuntu 12.04 56k USB Fax/Modem = Lenovo 43R1786 (43R1815) by Conexant

It's an old-school fax/modem that I'm trying to plug into a phone line, not a dsl modem.

Conexant D330 modem driver 46 weeks 11 hours ago

tried searching the site and didn't see anything (directly) on this.

I am about to go from windows XP to fedora and a little google research has shown me that there are driver problems for my conexant HDA d330 v.92 modem (wireless). If the modem doesn't work I will be stuck (I am making a clean break from windows). It "appears" that conexant has a driver labeled to work with Fedora.

When I install either a PCI serial or modem card I cannot get ubuntu to recognize it as an additional serial port like ttyS2. I have tried the setserial command and all the options, but I think its because the kernel does not have a module or driver for it. When I use the lspci -vvv command it shows kernel modules and drivers for the other PCI cards but nothing for the modem card.

Okay, I'm running Ubuntu 11.04.

I bought a USB Extarnal Modem. Whice is controller based, I think thats a hard ware modem correct me if i'm wrong.

Right now I'm on windows and it shows the manufacturer is "Conexant" The thing is...how would I be able to use this in ubuntu. As I know winmodems does not work with linux.

[ubuntu] NFSv4 Help 16 weeks 6 days ago

Been here on Ubuntu for a couple of years and finally thought I knew something and then I ran into this gem tonight:

The setup: All machines running LTS 12.04.1, updated/upgraded within the last day.

MachineServer: exports /dir x.x.0.0/24(rw,sync,no_subtree_check,no_root_squash) x.x.1.0/24(rw,sync,no_subtree_check,no_root_squash) User: cat (uid: 5001, gid: 5001) User: dog (uid: 6001, gid

[kubuntu] Send and Receive Fax 2 years 37 weeks ago

Hi, I just wanted to send and receive fax and this is my modem from lspci:

Code: 03:01.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem Predictive diagnostics for card in bus 03:01.0: Modem chipset detected on NAME="Communication controller: Conexant Systems, Inc.