3

[ubuntu] Wireless Help Please...

view full story
linux-howto

http://ubuntuforums.org – I am completely new to Linux, so excuse anything stupid I might be missing. Anyways, I just installed Linux on 3 of my laptops, and I'm having trouble enabling wireless on my oldest one. I tried to go through the tutorials, but it looks like my adapter should be supported, yet I can't get it enabled. Here is my information. Anything that I didn't understand I just pasted everything that the instructed command gave me. 1 ) Machine Brand and Model (PC/Laptop): Code: HP Pavilion zd8000 2 ) Wireless Brand, Model and Wireless Chipset: Code: Realtek Semiconductor Co. Ltd. RTL-8139/8139C/8139C+ (rev 10) 3 ) check interface: eth0 Link encap:Ethernet HWaddr 00:c0:9f:6e:71:d8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:20 Base address:0x5000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:"" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 4 ) Check for modules: Module Size Used by usbhid 38208 0 nls_iso8859_1 3740 1 nls_cp437 5372 1 vfat 10716 1 fat 51452 1 vfat binfmt_misc 8356 1 snd_intel8x0 30168 2 snd_ac97_codec 101216 1 snd_intel8x0 arc4 1660 2 ecb 2524 2 b43 122136 0 ac97_bus 1532 1 snd_ac97_codec snd_pcm_oss 37920 0 snd_mixer_oss 16028 1 snd_pcm_oss snd_pcm 75296 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_dummy 2656 0 snd_seq_oss 28576 0 snd_seq_midi 6432 0 snd_rawmidi 22208 1 snd_seq_midi snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event joydev 10272 0 mac80211 181236 1 b43 sdhci_pci 7100 0 sdhci 17472 1 sdhci_pci snd_timer 22276 2 snd_pcm,snd_seq snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq pcmcia 36808 0 iptable_filter 3100 0 ip_tables 11692 1 iptable_filter ppdev 6688 0 cfg80211 93052 2 b43,mac80211 psmouse 56180 0 yenta_socket 24200 1 rsrc_nonstatic 11644 1 yenta_socket pcmcia_core 35792 3 pcmcia,yenta_socket,rsrc_nonstatic tifm_7xx1 5372 0 tifm_core 7832 1 tifm_7xx1 lp 8964 0 parport 35340 2 ppdev,lp serio_raw 5280 0 led_class 4096 2 b43,sdhci x_tables 16544 1 ip_tables snd 59204 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_ oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_ti mer,snd_seq_device soundcore 7264 1 snd snd_page_alloc 9156 2 snd_intel8x0,snd_pcm 8139too 22620 0 video 19380 0 usb_storage 52544 1 8139cp 19260 0 mii 5212 2 8139too,8139cp ssb 35300 1 b43 ohci1394 29900 0 ieee1394 86596 1 ohci1394 radeon 636000 2 output 2780 1 video ttm 36212 1 radeon drm 159584 4 radeon,ttm i2c_algo_bit 5760 1 radeon intel_agp 27484 0 agpgart 34988 3 ttm,drm,intel_agp 5 ) Kernel boot messages [ 0.254006] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *10 11 14 15) [ 0.254132] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 11 14 15) *5 [ 0.254256] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15) [ 0.254378] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 11 14 15) *7 [ 0.254509] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *7 [ 0.254641] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled. [ 0.254773] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 *11 14 15) [ 0.254904] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *7 [ 0.255168] SCSI subsystem initialized [ 0.255213] libata version 3.00 loaded. [ 0.255213] usbcore: registered new interface driver usbfs [ 0.255213] usbcore: registered new interface driver hub [ 0.255213] usbcore: registered new device driver usb [ 0.255213] ACPI: WMI: Mapper loaded [ 0.255213] PCI: Using ACPI for IRQ routing [ 0.255213] pci 0000:00:1c.0: BAR 13: can't allocate resource [ 0.255213] pci 0000:00:1c.0: BAR 14: can't allocate resource [ 0.255213] pci 0000:00:1c.0: BAR 15: can't allocate resource [ 0.268013] Bluetooth: Core ver 2.15 [ 0.268040] NET: Registered protocol family 31 [ 0.268040] Bluetooth: HCI device and connection manager initialized [ 0.268040] Bluetooth: HCI socket layer initialized [ 0.268040] NetLabel: Initializing [ 0.268040] NetLabel: domain hash size = 128 [ 0.268040] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.268055] NetLabel: unlabeled traffic allowed by default [ 0.268183] hpet clockevent registered [ 0.268188] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.268194] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.268202] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.284017] pnp: PnP ACPI init [ 0.284041] ACPI: bus type pnp registered [ 0.286965] pnp: PnP ACPI: found 9 devices [ 0.286969] ACPI: ACPI bus type pnp unregistered [ 0.286974] PnPBIOS: Disabled by ACPI PNP [ 0.286990] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved [ 0.287002] system 00:02: ioport range 0x800-0x83f has been reserved [ 0.287007] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.287011] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.287015] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.287019] system 00:02: ioport range 0xfe00-0xfe00 has been reserved [ 0.287024] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.287028] system 00:02: iomem range 0xfed13000-0xfed13fff has been reserved [ 0.287032] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved [ 0.287037] system 00:02: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.287041] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.287045] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.287049] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.321779] AppArmor: AppArmor Filesystem Enabled [ 0.321839] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.321844] pci 0000:00:01.0: IO window: 0x4000-0x4fff [ 0.321850] pci 0000:00:01.0: MEM window: 0xc8100000-0xc81fffff [ 0.321855] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xd7ffffff [ 0.321860] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.321863] pci 0000:00:1c.0: IO window: disabled [ 0.321869] pci 0000:00:1c.0: MEM window: disabled [ 0.321873] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.321887] pci 0000:0b:00.0: CardBus bridge, secondary bus 0000:0c [ 0.321890] pci 0000:0b:00.0: IO window: 0x005400-0x0054ff [ 0.321896] pci 0000:0b:00.0: IO window: 0x005800-0x0058ff [ 0.321902] pci 0000:0b:00.0: PREFETCH window: 0x20000000-0x23ffffff [ 0.321908] pci 0000:0b:00.0: MEM window: 0x24000000-0x27ffffff [ 0.321914] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0b [ 0.321918] pci 0000:00:1e.0: IO window: 0x5000-0x5fff [ 0.321925] pci 0000:00:1e.0: MEM window: 0xc8200000-0xc82fffff [ 0.321930] pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x23ffffff [ 0.321945] alloc irq_desc for 16 on node -1 [ 0.321948] alloc kstat_irqs on node -1 [ 0.321955] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.321961] pci 0000:00:01.0: setting latency timer to 64 [ 0.321970] alloc irq_desc for 17 on node -1 [ 0.321973] alloc kstat_irqs on node -1 [ 0.321978] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.321985] pci 0000:00:1c.0: setting latency timer to 64 [ 0.321994] pci 0000:00:1e.0: setting latency timer to 64 [ 0.322005] pci 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.322014] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.322017] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.322021] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] [ 0.322024] pci_bus 0000:01: resource 1 mem: [0xc8100000-0xc81fffff] [ 0.322028] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff] [ 0.322032] pci_bus 0000:02: resource 0 mem: [0x0-0xfff] [ 0.322035] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff] [ 0.322038] pci_bus 0000:02: resource 2 mem: [0x0-0xfffff] [ 0.322042] pci_bus 0000:0b: resource 0 io: [0x5000-0x5fff] [ 0.322045] pci_bus 0000:0b: resource 1 mem: [0xc8200000-0xc82fffff] [ 0.322048] pci_bus 0000:0b: resource 2 pref mem [0x20000000-0x23ffffff] [ 0.322052] pci_bus 0000:0b: resource 3 io: [0x00-0xffff] [ 0.322055] pci_bus 0000:0b: resource 4 mem: [0x000000-0xffffffff] [ 0.322059] pci_bus 0000:0c: resource 0 io: [0x5400-0x54ff] [ 0.322062] pci_bus 0000:0c: resource 1 io: [0x5800-0x58ff] [ 0.322065] pci_bus 0000:0c: resource 2 pref mem [0x20000000-0x23ffffff] [ 0.322069] pci_bus 0000:0c: resource 3 mem: [0x24000000-0x27ffffff] [ 0.322126] NET: Registered protocol family 2 [ 0.322265] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.322684] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.322757] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.322825] TCP: Hash tables configured (established 16384 bind 16384) [ 0.322829] TCP reno registered [ 0.322916] NET: Registered protocol family 1 [ 0.323001] Trying to unpack rootfs image as initramfs... [ 0.570752] Freeing initrd memory: 7460k freed [ 0.575260] Simple Boot Flag at 0x36 set to 0x1 [ 0.575476] cpufreq-nforce2: No nForce2 chipset. [ 0.575520] Scanning for low memory corruption every 60 seconds [ 0.575653] audit: initializing netlink socket (disabled) [ 0.575673] type=2000 audit(1266145582.572:1): initialized [ 0.585223] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.587271] VFS: Disk quotas dquot_6.5.2 [ 0.587364] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.588152] fuse init (API version 7.12) [ 0.588271] msgmni has been set to 991 [ 0.588582] alg: No test for stdrng (krng) [ 0.588606] io scheduler noop registered [ 0.588609] io scheduler anticipatory registered [ 0.588612] io scheduler deadline registered [ 0.588675] io scheduler cfq registered (default) [ 0.589176] pci 0000:01:00.0: Boot video device [ 0.589345] alloc irq_desc for 24 on node -1 [ 0.589348] alloc kstat_irqs on node -1 [ 0.589361] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.589370] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.589503] alloc irq_desc for 25 on node -1 [ 0.589507] alloc kstat_irqs on node -1 [ 0.589517] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.589527] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.589652] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.589816] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.589827] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node df80ed38), AE_ALREADY_EXISTS [ 0.590017] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.590027] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node df80ed38), AE_ALREADY_EXISTS [ 0.590074] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.590354] ACPI: AC Adapter [ACAD] (on-line) [ 0.590437] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.590443] ACPI: Power Button [PWRF] [ 0.590525] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.741724] ACPI: Lid Switch [LID0] [ 0.741796] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 0.741801] ACPI: Power Button [PWRB] [ 0.741860] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 0.741864] ACPI: Sleep Button [SLPB] [ 0.742151] processor LNXCPU:00: registered as cooling_device0 [ 0.742157] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.742240] processor LNXCPU:01: registered as cooling_device1 [ 0.742246] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.745647] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.745660] ACPI: Thermal Zone [THRM] (37 C) [ 0.745750] isapnp: Scanning for PnP cards... [ 0.753332] ACPI: Battery Slot [BAT1] (battery absent) [ 0.769149] Switched to high resolution mode on CPU 1 [ 0.772015] Switched to high resolution mode on CPU 0 [ 1.098985] isapnp: No Plug & Play device found [ 1.100581] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.101025] alloc irq_desc for 22 on node -1 [ 1.101029] alloc kstat_irqs on node -1 [ 1.101038] serial 0000:00:1e.3: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.101046] serial 0000:00:1e.3: PCI INT A disabled [ 1.102377] brd: module loaded [ 1.103025] loop: module loaded [ 1.103132] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.103283] ata_piix 0000:00:1f.1: version 2.13 [ 1.103297] alloc irq_desc for 18 on node -1 [ 1.103300] alloc kstat_irqs on node -1 [ 1.103307] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.103356] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.103472] scsi0 : ata_piix [ 1.103593] scsi1 : ata_piix [ 1.103644] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3c40 irq 14 [ 1.103649] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3c48 irq 15 [ 1.105048] ata2: port disabled. ignoring. [ 1.105054] Fixed MDIO Bus: probed [ 1.105114] PPP generic driver version 2.4.2 [ 1.105240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.105267] alloc irq_desc for 23 on node -1 [ 1.105270] alloc kstat_irqs on node -1 [ 1.105277] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.105297] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.105303] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.105368] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.109273] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.109281] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 1.109300] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc8000000 [ 1.124015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.124128] usb usb1: configuration #1 chosen from 1 choice [ 1.124174] hub 1-0:1.0: USB hub found [ 1.124185] hub 1-0:1.0: 8 ports detected [ 1.124279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.124304] uhci_hcd: USB Universal Host Controller Interface driver [ 1.124338] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.124346] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.124351] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.124399] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.124427] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 [ 1.124536] usb usb2: configuration #1 chosen from 1 choice [ 1.124574] hub 2-0:1.0: USB hub found [ 1.124584] hub 2-0:1.0: 2 ports detected [ 1.124649] alloc irq_desc for 19 on node -1 [ 1.124652] alloc kstat_irqs on node -1 [ 1.124659] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.124667] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.124672] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.124723] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.124759] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000038c0 [ 1.124860] usb usb3: configuration #1 chosen from 1 choice [ 1.124900] hub 3-0:1.0: USB hub found [ 1.124910] hub 3-0:1.0: 2 ports detected [ 1.124979] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.124987] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.124991] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.125052] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.125086] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000038e0 [ 1.125188] usb usb4: configuration #1 chosen from 1 choice [ 1.125226] hub 4-0:1.0: USB hub found [ 1.125236] hub 4-0:1.0: 2 ports detected [ 1.125301] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1.125308] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.125313] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.125358] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.125392] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003c00 [ 1.125494] usb usb5: configuration #1 chosen from 1 choice [ 1.125532] hub 5-0:1.0: USB hub found [ 1.125542] hub 5-0:1.0: 2 ports detected [ 1.125676] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.128119] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.128131] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.128249] mice: PS/2 mouse device common for all mice [ 1.128436] rtc_cmos 00:05: RTC can wake from S4 [ 1.128483] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.128511] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.128657] device-mapper: uevent: version 1.0.3 [ 1.128784] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] [ 1.128897] device-mapper: multipath: version 1.1.0 loaded [ 1.128902] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.129075] EISA: Probing bus 0 at eisa.0 [ 1.129083] Cannot allocate resource for EISA slot 1 [ 1.129090] Cannot allocate resource for EISA slot 3 [ 1.129094] Cannot allocate resource for EISA slot 4 [ 1.129096] Cannot allocate resource for EISA slot 5 [ 1.129109] EISA: Detected 0 cards. [ 1.129242] cpuidle: using governor ladder [ 1.129248] cpuidle: using governor menu [ 1.129980] TCP cubic registered [ 1.130160] NET: Registered protocol family 10 [ 1.130824] lo: Disabled Privacy Extensions [ 1.131356] NET: Registered protocol family 17 [ 1.131385] Bluetooth: L2CAP ver 2.13 [ 1.131388] Bluetooth: L2CAP socket layer initialized [ 1.131391] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.131394] Bluetooth: SCO socket layer initialized [ 1.131437] Bluetooth: RFCOMM TTY layer initialized [ 1.131443] Bluetooth: RFCOMM socket layer initialized [ 1.131445] Bluetooth: RFCOMM ver 1.11 [ 1.131489] Using IPI No-Shortcut mode [ 1.131575] PM: Resume from disk failed. [ 1.131593] registered taskstats version 1 [ 1.131743] Magic number: 14:256:125 [ 1.131787] acpi device:00: hash matches [ 1.131822] rtc_cmos 00:05: setting system clock to 2010-02-14 11:06:23 UTC (1266145583) [ 1.131827] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.131829] EDD information not available. [ 1.157940] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.273563] ata1.00: ATA-6: TOSHIBA MK8026GAX, PA002G, max UDMA/100 [ 1.273567] ata1.00: 156301488 sectors, multi 16: LBA [ 1.273617] ata1.01: ATAPI: HL-DT-ST DVD-RW GCA-4080N, 0C35, max MWDMA2 [ 1.280324] ata1.00: configured for UDMA/100 [ 1.296225] ata1.01: configured for MWDMA2 [ 1.298717] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8026GA PA00 PQ: 0 ANSI: 5 [ 1.298892] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.300554] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.300631] sd 0:0:0:0: [sda] Write Protect is off [ 1.300635] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.300673] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.300870] sda: sda1 sda2 < [ 1.357502] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-RW GCA-4080N 0C35 PQ: 0 ANSI: 5 [ 1.381516] sda5 > [ 1.385022] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.393473] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.393478] Uniform CD-ROM driver Revision: 3.20 [ 1.393577] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.393643] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.393689] Freeing unused kernel memory: 540k freed [ 1.394136] Write protecting the kernel text: 4568k [ 1.394198] Write protecting the kernel read-only data: 1836k [ 1.437044] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 1.575206] Linux agpgart interface v0.103 [ 1.583807] usb 1-5: configuration #1 chosen from 1 choice [ 1.729209] [drm] Initialized drm 1.1.0 20060810 [ 1.759370] [drm] radeon default to kernel modesetting DISABLED. [ 1.759412] pci 0000:01:00.0: power state changed by ACPI to D0 [ 1.759426] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.759433] pci 0000:01:00.0: setting latency timer to 64 [ 1.759608] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 [ 1.783634] ohci1394 0000:0b:00.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.793300] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.799528] Initializing USB Mass Storage driver... [ 1.802964] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input6 [ 1.803042] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.803405] scsi2 : SCSI emulation for USB Mass Storage devices [ 1.803579] usbcore: registered new interface driver usb-storage [ 1.803587] USB Mass Storage support registered. [ 1.803789] usb-storage: device found at 2 [ 1.803794] usb-storage: waiting for device to settle before scanning [ 1.836060] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[c8208000-c82087ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.836178] b43-pci-bridge 0000:0b:03.0: enabling device (0000 -> 0002) [ 1.836194] b43-pci-bridge 0000:0b:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.901075] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:03.0 [ 1.901455] 8139cp 0000:0b:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.905306] 8139too Fast Ethernet driver 0.9.28 [ 1.905378] alloc irq_desc for 20 on node -1 [ 1.905384] alloc kstat_irqs on node -1 [ 1.905398] 8139too 0000:0b:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.906861] eth0: RealTek RTL8139 at 0x5000, 00:c0:9f:6e:71:d8, IRQ 20 [ 3.018160] PM: Starting manual resume from disk [ 3.018166] PM: Resume from partition 8:5 [ 3.018168] PM: Checking hibernation image. [ 3.018395] PM: Resume from disk failed. [ 3.023103] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.023111] EXT4-fs (sda1): write access will be enabled during recovery [ 3.050737] EXT4-fs (sda1): barriers enabled [ 3.112270] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800285600061dc9] [ 4.416258] kjournald2 starting: pid 370, dev sda1:8, commit interval 5 seconds [ 4.416282] EXT4-fs (sda1): delayed allocation enabled [ 4.416288] EXT4-fs: file extents enabled [ 4.427637] EXT4-fs: mballoc enabled [ 4.427661] EXT4-fs (sda1): orphan cleanup on readonly fs [ 4.427672] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 107 [ 4.427716] EXT4-fs (sda1): 1 orphan inode deleted [ 4.427722] EXT4-fs (sda1): recovery complete [ 4.774384] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 5.553326] type=1505 audit(1266145587.921:2): operation="profile_load" pid=393 name=/usr/share/gdm/guest-session/Xsession [ 5.556631] type=1505 audit(1266145587.924:3): operation="profile_load" pid=394 name=/sbin/dhclient3 [ 5.557424] type=1505 audit(1266145587.924:4): operation="profile_load" pid=394 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 5.557856] type=1505 audit(1266145587.924:5): operation="profile_load" pid=394 name=/usr/lib/connman/scripts/dhclient-script [ 5.626933] type=1505 audit(1266145587.993:6): operation="profile_load" pid=395 name=/usr/bin/evince [ 5.639207] type=1505 audit(1266145588.004:7): operation="profile_load" pid=395 name=/usr/bin/evince-previewer [ 5.646483] type=1505 audit(1266145588.012:8): operation="profile_load" pid=395 name=/usr/bin/evince-thumbnailer [ 5.667054] type=1505 audit(1266145588.032:9): operation="profile_load" pid=397 name=/usr/lib/cups/backend/cups-pdf [ 5.667974] type=1505 audit(1266145588.032:10): operation="profile_load" pid=397 name=/usr/sbin/cupsd [ 5.682439] type=1505 audit(1266145588.048:11): operation="profile_load" pid=398 name=/usr/sbin/tcpdump [ 6.505060] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k [ 6.797033] EXT4-fs (sda1): internal journal on sda1:8 [ 6.803964] usb-storage: device scan complete [ 6.815014] udev: starting version 147 [ 6.835636] scsi 2:0:0:0: Direct-Access ST350082 0AS PQ: 0 ANSI: 2 CCS [ 6.836354] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 6.837740] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 6.838303] sd 2:0:0:0: [sdb] Write Protect is off [ 6.838312] sd 2:0:0:0: [sdb] Mode Sense: 00 38 00 00 [ 6.838318] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.840728] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.840736] sdb: sdb2 [ 8.635050] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 8.635058] sd 2:0:0:0: [sdb] Attached SCSI disk [ 10.568709] eth0: link down [ 10.568811] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.255373] intel_rng: FWH not detected [ 13.099875] lp: driver loaded but no devices found [ 13.117406] tifm_7xx1 0000:0b:00.3: enabling device (0000 -> 0002) [ 13.117421] tifm_7xx1 0000:0b:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.192504] yenta_cardbus 0000:0b:00.0: CardBus bridge found [103c:3082] [ 13.192530] yenta_cardbus 0000:0b:00.0: Enabling burst memory read transactions [ 13.192539] yenta_cardbus 0000:0b:00.0: Using CSCINT to route CSC interrupts to PCI [ 13.192544] yenta_cardbus 0000:0b:00.0: Routing CardBus interrupts to PCI [ 13.192553] yenta_cardbus 0000:0b:00.0: TI: mfunc 0x01a01b22, devctl 0x64 [ 13.432735] yenta_cardbus 0000:0b:00.0: ISA IRQ mask 0x0cf8, PCI irq 16 [ 13.432743] yenta_cardbus 0000:0b:00.0: Socket status: 30000006 [ 13.432755] yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 13.432762] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean. [ 13.433188] yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff [ 13.433195] yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff [ 13.463230] ppdev: user-space parallel port driver [ 13.497126] cfg80211: Calling CRDA to update world regulatory domain [ 13.637061] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.016899] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x80b1, caps: 0xa04713/0x20040a [ 14.053124] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 14.295817] sdhci: Secure Digital Host Controller Interface driver [ 14.295823] sdhci: Copyright(c) Pierre Ossman [ 14.299681] sdhci-pci 0000:0b:00.4: SDHCI controller found [104c:8034] (rev 0) [ 14.299701] sdhci-pci 0000:0b:00.4: enabling device (0000 -> 0002) [ 14.299715] sdhci-pci 0000:0b:00.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.299823] Registered led device: mmc0:: [ 14.299890] mmc0: SDHCI controller on PCI [0000:0b:00.4] using PIO [ 14.299956] Registered led device: mmc1:: [ 14.300031] mmc1: SDHCI controller on PCI [0000:0b:00.4] using PIO [ 14.301778] Registered led device: mmc2:: [ 14.301863] mmc2: SDHCI controller on PCI [0000:0b:00.4] using PIO [ 14.729007] cfg80211: World regulatory domain updated: [ 14.729014] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.729019] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.729023] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.729027] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.729031] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.729034] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.948760] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 14.950131] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 14.950803] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 14.951236] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 14.951947] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 16.120933] b43-phy0: Broadcom 4318 WLAN found (core revision 9) [ 16.199764] phy0: Selected rate control algorithm 'minstrel' [ 16.201474] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 16.384038] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 16.456446] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 16.456494] Intel ICH 0000:00:1e.2: setting latency timer to 64 [ 16.492836] b43 ssb0:0: firmware: requesting b43-open/ucode5.fw [ 16.497710] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 16.497720] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 16.497726] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/...devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 16.776018] intel8x0_measure_ac97_clock: measured 51612 usecs (2487 samples) [ 16.776023] intel8x0: clocking to 48000 [ 16.860037] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 16.864310] b43 ssb0:0: firmware: requesting b43-open/ucode5.fw [ 16.874126] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 16.874136] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 16.874143] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/...devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 18.789558] CPU0 attaching NULL sched-domain. [ 18.789567] CPU1 attaching NULL sched-domain. [ 18.808078] CPU0 attaching sched-domain: [ 18.808084] domain 0: span 0-1 level SIBLING [ 18.808089] groups: 0 1 [ 18.808097] CPU1 attaching sched-domain: [ 18.808101] domain 0: span 0-1 level SIBLING [ 18.808104] groups: 1 0 [ 20.121169] [drm] Setting GART location based on new memory map [ 20.122342] [drm] Loading R300 Microcode [ 20.122376] [drm] Num pipes: 1 [ 20.122384] [drm] writeback test succeeded in 1 usecs [ 26.478928] CPU0 attaching NULL sched-domain. [ 26.478937] CPU1 attaching NULL sched-domain. [ 26.493100] CPU0 attaching sched-domain: [ 26.493106] domain 0: span 0-1 level SIBLING [ 26.493111] groups: 0 1 [ 26.493119] CPU1 attaching sched-domain: [ 26.493123] domain 0: span 0-1 level SIBLING [ 26.493127] groups: 1 0 [ 106.896018] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 107.080143] usb 3-1: configuration #1 chosen from 1 choice [ 107.153457] usbcore: registered new interface driver hiddev [ 107.187335] input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input8 [ 107.187520] generic-usb 0003:045E:008C.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:1d.1-1/input0 [ 107.187560] usbcore: registered new interface driver usbhid [ 107.187569] usbhid: v2.6:USB HID core driver 6 ) Network configuration *-network:0 description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 2 bus info: pci@0000:0b:02.0 logical name: eth0 version: 10 serial: 00:c0:9f:6e:71:d8 size: 10MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10MB/s resources: irq:20 ioport:5000(size=256) memory:c8209400-c82094ff *-network:1 description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 3 bus info: pci@0000:0b:03.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:17 memory:c8206000-c8207fff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:90:4b:f5:57:2f capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg 7 ) Scan for networks: wlan0 Failed to read scan data : Network is down 8 ) Ubuntu Version: Code: Ubuntu 9.10 9 ) Kernel/architecture (including 32 vs. 64 bit): Code: 2.6.31-14-generic i686 (HowTos)