Hello,
One of our client's ips are keep getting blocked while doing ftp through an ftp client by CSF+LFD. It is giving the following reason
*Port Scan* detected from ip
I have read in CSF forum that It's the way FTP works: Data connections use a consecutive range of ports in a round-robin style. Once the range is exhausted, it starts from the beginning.
Hi,
I recently bought a USB3 to SATA3 Adapter to connect internal disk drives through USB.
It works perfectly when connected to USB2 ports, but when I connect it to a USB3 port it isn't detected at all, nor in lsusb nor, obviously, in fdisk -l.
When detected (on USB2) it is shown as:
Code:
Bus 002 Device 008: ID 174c:55aa ASMedia Technology Inc.
Any idea?
How can I which ports are open/closed on my system? I am running Ubuntu 12.04, and to my knowledge there is no firewall running or installed, although it may have been in the past.
I am trying to configure Deluge because currently no incoming connections are being allowed. I checked that UPnP is enabled on the router and also configured port forwarding.
As more-and-more ports depend on a great deal of other ports and those ports are frequently upgraded installation of a single port can take long hours due to unnecessary upgrades of dependencies.
Can I somehow specify that I do not want to upgrade my existing dependent ports when I install a new port?
it seems possible with linux apt-get...
I host a hub(using Ynhub) on windows with port 10.22.24.228:511. I want to continue the hub on ubuntu.
I couldn't find ynhub software for linux. So I tried opening it with wine. But hosting ports more than 1023 only works.
It shows up this error if i tried to host with port 511 : Failed to start listening on port 511, port may be inuse
and same errors respectively for all ports less than 1024.
I installed ubuntu 12.10 64 bit version in my system. I want to disable all the usb ports. Except usb keyboard and mouse. I tried to add a line blacklist usb_storage in the /etc/modprobe.d/blacklist.conf and run the command sudo modprobe usb_storage. Reboot the system. But still the usb port is detected. What is the problem?
Anyone can help me to find the solution?
How do I change the ports that something like xchat uses to make it use the same port as firefox?
I am currently somewhere that has all non browser ports blocked.
Thanx,
uRock
Background:
I have a desktop computer running Ubuntu 12.04.
I have installed DRBL to handle DHCP server and Clonezilla Server.
I have a network card in my desktop with 2 ports in it.
These 2 ports are bonded together and are used by DRBL.
There is a 3rd port integrated in the motherboard.
I want to use this 3rd port for internet.
DRBL knows that this is set for internet.
Ubuntu Network-Manager ha
Background:
I have a desktop computer running Ubuntu 12.04.
I have installed DRBL to handle DHCP server and Clonezilla Server.
I have a network card in my desktop with 2 ports in it.
These 2 ports are bonded together and are used by DRBL.
There is a 3rd port integrated in the motherboard.
I want to use this 3rd port for internet.
DRBL knows that this is set for internet.
Ubuntu Network-Manager ha
Email this page
