1

[ubuntu] how to get text of cellular modem crash report

view story
linux-howto

http://ubuntuforums.org – Hi All, I live in India. I'm trying to get a Reliance CDMA usb cellular broadband 3G modem to work with 12.04. I've tried many things with no success. A good linux techie tried also with no success. Editing wvdial.conf did not help. See attached pic. I keep getting this crash report. How do I save this crash report so I post all the details to this forum? Keep in mind I'm not able to connect to the internet. See farther below for more details. Thanks, Advait Here's wvdial.conf ********************* [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Modem Type (Hardware)

colm's picture
Submitted by colm on 09/21/2012

Stories similar to [ubuntu] how to get text of cellular modem crash report

Been banging my head for a few hours now and it seems wvdial is the only way I can get this damn USB modem to work in ubuntu.

Heres my wvdial.conf

Code: [Dialer Defaults] Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Modem Type = Analog Modem Phone = *99***3# ISDN = 0 Username = <yournumber>@vzw4g.com Init1 = ATZ Password = vzw Modem = /dev/ttyUSB0 Baud = 9600 Stupid Mode = 1 I h

wvdial might also be a workaround, if one does not like to downgrade. In my case, I had to unset my PIN on the SIM card first.

Hi Guys,I am trying to use wvdial to connect to the network (Network Manager works fine, but I want to use wvdial for other reasons).When I try to connect I get this error..... CONNECT 7200000 The PPP daemon has died.

I want to connect to the internet via a dialup modem which is a US Robotics v92 USB modem which worked with F15, and works with Windows. The computer is a new ASUS desktop CM6870 with i7-3770 @ 3.40 GHz 64 bit system. I think wvdial is working but Firefox, Kmail, and Thunderbird fail to connect to server, or report no host.

I am using wvdial to connect to 3G network.

Sample conf is below. I want to add an if clause. If the Serial Number of the device is not my serial number it should not connect. Serial number can be shown by AT+CGSN.

How can I implement such "if ( AT+CGSN == 123456789 ); then" clause using wvdial? Can I?

Hi,I just bought a usb modem ZTE MF195, and I am using Aero2 network (Poland).After googling, I found out how to setup this modem to work on Arch, but it only works with wvdial and it doesn't connect with NetworkManager.My config /etc/wvdial.conf:[Dialer Defaults] Modem = /dev/ttyACM0 Init1 = AT+CGDCONT=1,"IP","darmowy" Phone = *99# Carrier Check = yes Stupid mode = yes Us

Ethernet Configuration 2 years 40 weeks ago

I am using Sony vaio E series laptop.

[ubuntu] downloading 10.04 34 weeks 5 days ago

http://releases.ubuntu.com/lucid/

Hi All,

See link above. Is the downloadable 10.04 on this page up-to-date? Or is it the original 10.04 without any updates since then? If it's the original with no updates, is there a place where I can download an up-to-date 10.04 ISO?

I'm in Kerala, India and my Reliance CDMA usb cellular modem worked fine with 10.04 but doesn't work with 12.04.

Keywords: Broadband, UMTS, HSPA, HDSPA, Huawei E180, ITALY, TRE, TIM, PUPPY LINUX 4.1.2

Step_001: Create the file /etc/wvdial.conf as follows: # FILE /etc/wvdial.conf BEGIN vvvvvvvv [Dialer Defaults] Modem = /dev/ttyUSB0 ISDN = off Modem Type = Analog Modem Baud = 921600 Init2 = AT&F+COPS? Init3 = AT+cgdcont=1,"ip","ibox.tim.it",,0,0 #Init3 = AT+cgdcont=1,"ip",&q