5

[ubuntu] Help....new USB stick not working!

view full story
linux-howto

http://ubuntuforums.org – well, I bought a new HP v220w stick of 16 GB, but my ubuntu 10.04 LTS is not detecting it. when i plug the USB nothing happens. on typing dmesg | tail, i get the following output: ------------------------------------------------------------------------------------------------ [455318.120541] usb 2-5: device descriptor read/64, error -62 [455318.404534] usb 2-5: device descriptor read/64, error -62 [455318.684555] usb 2-5: new low speed USB device using ohci_hcd and address 22 [455318.868535] usb 2-5: device descriptor read/64, error -62 [455319.152532] usb 2-5: device descriptor read/64, er (Hardware)

colm's picture
Submitted by colm on 11/06/2012 – Made popular on 11/06/2012

Stories similar to [ubuntu] Help....new USB stick not working!

Hi,

I would like to know what the below error means:

[1366883.956615] usb 2-1: new full-speed USB device number 21 using ohci_hcd @ [1366899.184338] usb 2-1: device descriptor read/64, error -110 @ [1366916.100536] usb 2-1: device descriptor read/all, error -110

My USB stick doesn't get recognized and this is the error I get. I would like to know what error -110 means.

I have a USB headset with microphone (Logitech, model number appears to be A-00009) that I can't seem to get Ubuntu (Natty, 32-bit) to recognize. The hardware is an Asus K52F laptop.

Hey, I have a really old webcam, the Samsung MPC-C10. I tried to plug it in just to see if i worked and I got this:

Code: cako@lynx2:~$ dmesg | tail -11[ 1423.193212] usb 3-1: new full speed USB device using uhci_hcd and address 14 [ 1423.316057] usb 3-1: device descriptor read/64, error -71 [ 1423.540067] usb 3-1: device descriptor read/64, error -71

My Enlight mATX case has a built-in infrared receiver.When I connect it to the mainboard and boot my machine, the following is in my kernel log:usb 2-1.4: new full speed USB device number 3 using ehci_hcdusb 2-1.4: device descriptor read/64, error -32usb 2-1.4: device descriptor read/64, error -32usb 2-1.4: new full speed USB device number 4 using ehci_hcdusb 2-1.4: device descriptor read/64, erro

When I boot USB devices don't work for minutes and I see a lot of errors like the ones below in my syslog:

Code: Oct 20 21:22:00 *********** kernel: [  439.359433] usb 1-1.4: device descriptor read/64, error -110 Oct 20 21:22:15 *********** kernel: [  454.528355] usb 1-1.4: device descriptor read/64, error -110 Oct 20 21:22:15 *********** kernel: [  454.704183] usb 1-1.4: ne

[ubuntu] Winpower and USB 45 weeks 6 days ago

I have Winpower (UPS management software) connected via USB the problem is - the software can't see the com port its connected to outputs:-

Code: LINUXPC ~ # dmesg|tail [87142.468031] usb 3-1: device descriptor read/64, error -71 [87142.696040] usb 3-1: device descriptor read/64, error -71 [87142.912045] usb 3-1: new low speed USB device number 20 using uhci_hcd [87143.328025] usb 3-1: device

I am trying to get a new external USB drive working on a system. The drive works under windows, and other drives work on this linux box, so I suspect there may be a compatibility issue with that particular drive.

The problem existed under 11.1, I just did a fresh install of 11.2 but get the same issue.

Usb flash drive write error 3 years 28 weeks ago

Hi. I have problem writing on kingston flash drive 16GB (FAT32). Reading is fine. I have opensuse 11.2 x64. Dmesg output:

Since I installed Xubuntu 12.04 on my Acer Aspire One netbook (Model AOD250), not only has the webcam stopped working, but the machine also refuses to suspend on occasion, due to the webcam problem.

Note, the webcam and suspend both worked properly on Ubuntu 11.10

Here is a dmesg excerpt from a failed suspend:

[10141.016213] usb 2-2: new full-speed USB device number 14 using uhci_hcd [10156.128