5

[SOLVED] nfs HALP

view full story
linux-howto

http://forums.fedoraforum.org – hello. i'm trying to figure how to make my nfs server and client working . i followed fedora-fr.org tutorial , but i'm facing a wall now. so - hosts.deny is empty on server and client -iptables -A INPUT -s 192.168.x.x/24 -j ACCEPT for SERVER and CLIENT - and showmount -e $serverip return the exports point correctly -nmap from client to server show: PORT STATE SERVICE 22/tcp open ssh 111/tcp open rpcbind 2049/tcp open nfs the volume i want to exports is ntfs. the client use wlan0 the server use eth0 finally , i use mount -t nfs $serverIP:/media/ntfs (HowTos)

nicelinux's picture
Submitted by nicelinux on 11/28/2012 – Made popular on 11/28/2012

Stories similar to [SOLVED] nfs HALP

I have my nfs server running on 192.168.1.99 box, and I have my /etc/exports configured using

/myshare 192.168.1.*(rw,sync,no_subtree_check)

I was able to mount nfs from 192.168.1.50 client box.

However I was unable to mount from 192.168.1.49!

I have an NFSv3 export from a Linux fileserver which used to mount fine. The fileserver had to go down for hardware maintenance. After bringing the server back up, the Linux client can no longer mount the nfs export.

No configuration has changed on the server or the client.

I have a basic setup that requires the following Client -> iptables DNAT -> Server using udp messaging:

The configuration I have on my client is: (my server is 172.33.1.30)

ifconfig eth0:1 172.32.1.10 netmask 255.255.0.0 ifconfig eth1 172.33.1.10 netmask 255.255.0.0 iptables -t nat -A PREROUTING -p udp -i eth0 -d 172.32.1.10 --dport 1001 -j DNAT --to 172.33.1.30 iptables -A FORWARD -p udp -i et

FTP Client/Server 13 weeks 2 days ago

when i receive the file from server and i open it only garbage is there in file.? How to remove this?

I am using simple FTP client and server ,where server askes for username and password and client logs in py giving the above details than client enters the name of file to be downloaded from server and client receive the file from server and save it on the desktop.When I open it shows garbage dat

Firewall NFS error 3 years 19 weeks ago

Hello all,

I have an OpenVPN server and I can connect to it just fine but I can not communicate with any other hosts on the network including the server. I can't ping from the server to an OpenVPN client, I can't ping from an OpenVPN client to the OpenVPN server, I can't ping from OpenVPN client to OpenVPN client or from OpenVPN client to normal LAN host and vise-versa.

It's a server which listens at https://. It uses a self-signed cert. So, each time when I access it, I will be prompted to trust this untrusted site. However, I always get the following error in the server log.

Hi Guys I wanted to develop a kernel for my server. It will work in following way: * ECLIPSE(IDE) process is running on client(local data) w/o actually being installed on client, it is rather installed on server, so all libraries/files are on server * So when client wants to run IDE, it requests server for IDE's process.

I have a USB disk which has 2 partitions.I exported one of them (on NFS) and now I am trying to mount it at client machine. Each time it gets error

Quote:

mount -t nfs 192.168.1.19:/media/vol2 /mnt/nfs/ mount.nfs: access denied by server while mounting 192.168.1.19:/media/vol2

Here is the /etc/exports file entry

Quote:

/media/vol2 *