5

rt2x00lib_request_firmware: Error

view full story
linux-howto

http://forums.opensuse.org – 11.2 KDE RT2561 PCI Seems that although the firmware is available, file:///lib/firmware/rt2561.bin, file:///lib/firmware/rt2561s.bin, it can't be accessed by the kernel. Anyone have an idea as to why? --------------------------------------- Yast Network Settings: .... snip ... RT2561/RT61 802.11g PCI MAC : 00:1f:1f:05:ca:c0 BusID : 0000:05:01.0 Device Name: wlan0 Started automatically at boot IP address assigned using DHCP hwinfo --wlan 23: PCI 501.0: 0282 WLAN controller [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_1814_301 Unique ID: y9sn.gohsp1cSoiA Parent ID: 6NW+.two+GgbUMg7 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:05:01.0 SysFS BusID: 0000:05:01.0 Hardware Class: network Model: "RaLink EW-7108PCg" Vendor: pci 0x1814 "RaLink" Device: pci 0x0301 "RT2561/RT61 802.11g PCI" SubVendor: pci 0x1814 "RaLink" SubDevice: pci 0x2561 "EW-7108PCg" Driver: "rt61pci" Driver Modules: "rt61pci" Device File: wlan0 Features: WLAN Memory Range: 0xfb000000-0xfb007fff (rw,non-prefetchable) IRQ: 19 (no events) HW Address: 00:1f:1f:05:ca:c0 Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v00001814d00000301sv00001814sd00002561bc02sc80i00" Driver Info #0: Driver Status: rt61pci is active Driver Activation Cmd: "modprobe rt61pci" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge) /sbin/lspci: -v .... snip ... 05:01.0 Network controller: RaLink RT2561/RT61 802.11g PCI Subsystem: RaLink EW-7108PCg Flags: bus master, slow devsel, latency 32, IRQ 19 Memory at fb000000 (32-bit, non-prefetchable) [size=32K] Capabilities: [40] Power Management version 2 Kernel driver in use: rt61pci dmesg | less .... snip ... [ 19.699517] r8169: eth0: link up [ 19.699525] r8169: eth0: link up [ 20.877911] NET: Registered protocol family 17 [ 24.239835] rt61pci 0000:05:01.0: firmware: requesting rt2561s.bin [ 84.239172] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 86.166652] CPU0 attaching NULL sched-domain. [ 86.166656] CPU1 attaching NULL sched-domain. [ 86.169175] CPU0 attaching sched-domain: [ 86.169177] domain 0: span 0-1 level MC [ 86.169179] groups: 0 1 [ 86.169183] CPU1 attaching sched-domain: [ 86.169185] domain 0: span 0-1 level MC [ 86.169186] groups: 1 0 [ 90.183743] rt61pci 0000:05:01.0: firmware: requesting rt2561s.bin [ 150.183045] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 150.185078] rt61pci 0000:05:01.0: firmware: requesting rt2561s.bin [ 210.185170] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 211.492808] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Kernel log: .... snip ... 2010-03-14 14:08:36 r8169 eth0: link up 2010-03-14 14:08:36 r8169 eth0: link up 2010-03-14 14:08:37 NET Registered protocol family 17 2010-03-14 14:08:41 rt61pci 0000 5:01.0: firmware: requesting rt2561s.bin 2010-03-14 14:09:41 phy0 -> - Failed to request Firmware. 2010-03-14 14:09:43 CPU0 attaching NULL sched-domain. 2010-03-14 14:09:43 CPU1 attaching NULL sched-domain. 2010-03-14 14:09:43 CPU0 attaching sched-domain: 2010-03-14 14:09:43 domain 0 span 0-1 level MC 2010-03-14 14:09:43 groups 0 1 2010-03-14 14:09:43 CPU1 attaching sched-domain: 2010-03-14 14:09:43 domain 0 span 0-1 level MC 2010-03-14 14:09:43 groups 1 0 2010-03-14 14:09:47 rt61pci 0000 5:01.0: firmware: requesting rt2561s.bin 2010-03-14 14:10:47 phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. 2010-03-14 14:10:47 rt61pci 0000 5:01.0: firmware: requesting rt2561s.bin 2010-03-14 14:11:47 phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. 2010-03-14 14:11:48 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found (Distributions)