How do I connect two Linksys RV082 routers when one router is on the 16th floor of a building and the 2nd one is in the LG (lower ground).
Both routers should connect wherein the DHCP of the other router is off.. and both routers have different ISP.
Or is transparent bridging applicable?and how?...
Thank you in advance.
I recently changed my internet to a business plan I have a new static ip and I got 2 routers 1 is a trendnet tew 432brp and linksys router switch befsr81 I have two servers running ubuntu 12.04
Problem a:
When I type my public static ip address currently assigned to linksys router/switch from behind the router I cannot see my server I can only access from lan ip, I used to be able to edit websit
Making server for school. ISP is PPPoe. internet-modem/router-server-WAN(eth0)-LAN(eth2)-switch-clients. eth0 is dhcp. eth2 is static 10.10.0.1 255.255.255.0.
I am attemting to use dnsmasq to create dns caching and dhcp on LAN.
I commented out dns-dnsmasq in NM, downloaded and installed dnsmasq, and configured dnsmasq.conf, but no caching and no dhcp.
i am new to configuring routers, we have purchased a RV016 cisco business router that has multiwan capability. What we are attempting to do is take map services from 3 different servers and assign 3 different static ip addresses and then forward port 80 through the router. A short term solution to building a proxy server. Is this possible?
I have a Linksys WAG320N Wireless N router and a Belkin Wireless N router. The Linksys is acting as a modem and DHCP server, and I want to set up the Belkin as an AP. Is there any reason this shouldn't be possible? Am I right in thinking it's a case of connecting the two routers via ethernet and setting up the Belkin as an AP only and giving it a static IP?
Hi all
Internet Connection:-
DSL 4MB/4MB (up and down)
Static IP
(for home use)
--------------
Wiring connection:
PC -> Router -> Modem -> ISP
Modem and router are supplied by ISP.
Modem:
Comtrend
Model SR-2010 (4 wire)
Router - wire
The modem is provided with 4 sockets, only one being used and connected to the router.
I'm prepared to set up an addional network
I have a subnet of public IP addresses that my ISP has provided me with. They are routed through my router (how profound) that has a a static IP. I have successfully assigned the IPs from that subnet to various devices on my network. This works just fine, they get their own public IP, they can access the Internet, and the Internet can access them.
Hello,I have a problem connecting to internet, in windows it`s pretty easy:
i need to connect to my access point (i need to disable all the protocols IPv4 and IPv6 on my wireless card)
and then connect to another network "wan miniport(PPPoE)" with my login and password.
Hello,I have a problem connecting to internet, in windows it`s pretty easy:
i need to connect to my access point (i need to disable all the protocols IPv4 and IPv6 on my wireless card)
and then connect to another network "wan miniport(PPPoE)" with my login and password.
Email this page
