3

pppoe connection problem

view full story
linux-howto

http://forums.fedoraforum.org – hello my friend i want to connect to internet with pppoe connection on fedora , sabayon , pardus and etc ! to do this i used this command Code: sudo pppoe-setup when it's done i typed these commands : Code: pppoe-start pppoe-status you can check the results here : up.taktemp.com/images/r10gdasd91mfzf2gcgx4.jpg also the outputs of these following commands Code: ping -c3 4.2.2.4 ping -c3 google.com is : up.taktemp.com/images/q0dt1x6qe9scxb446h.jpg note : on kubuntu i use sudo pppoeconf and it work well ! how i can use this on fedora or sabayon ?! (HowTos)

nicelinux's picture
Submitted by nicelinux on 05/21/2012 – Made popular on 05/21/2012

Stories similar to pppoe connection problem

Hi,

I'm having a problem getting a PPPoE connection to work over a wireless network.

My internet provider uses PPPoE to authenticate over the wireless network. My USB wireless device can connect to the WAP, but the PPPoE is where I start having problems. If I try to set up the PPPoE it tries to connect on the eth port instead of the wlan.

Hello guys. My name is Ovid. I'm using Fedora 16 on my TOSHIBA C660 Laptop. I want to configure my network internet with ppp0. (PPPoE) I set up with pppoe-setup, but doing pppoe-start, it's not starting. If I do ifconfig, I don't see eth0 or ppp0, i see p17p1 or something like that. How should I do?

I have a username and a password for my broadband connection. Everytime when I installed a new Ubuntu on my old machine, I used command line way configuring pppoe network connection.

1. Open terminal from the dash home or press Ctrl+Alt+T, execute this command: sudo pppoeconf

2. It starts looking for pppoe access concentrator on eth0…

3.

Pppoe connection error. 36 weeks 6 days ago

Hi, I am using Fedora16.

I just had Ubuntu installed on my computer. The wired internet connection requires username and password. I followed the steps that I saw on google, by using “sudo pppoeconf”， but it told me "Unable to complete PPPoE Discovery", what should I do?

Hello all....

I have a working PPPoE connection which works fine with XP .. I have installed ubuntu 9.10 inside windows recently...But PPPoE is not working with ubuntu...

I am a new bee , to arch, ubuntu , mint  and opensuse are the distros i have known well, but in arch - after connecting to the DSL pppoe (dynamic ip ) & wired connection, I cannot ping , or update from mirros.Don't know why ?

Greetings,

Need some information on how to setup the router.

I don't know if it is a standard way, but below is how my ISP provides Internet access.

I have a LAN cable coming in and the LAN connection is configured as follows -

IP - 169.254.xx.xx subnet - 255.255.0.0 gateway - 192.168.0.1 DNS - some IPs

And then there is a PPPoE connection that uses a username and password and (probably) get

Hi!

I have come to this place because i cant get my pppoe on ubuntu 12.10 to work an am pretty new to this so please bear with me.

with sudo pppoeconf i get the following message:

"Sorry I scanned 1 interface, but the Access Concentrator of your provider did not respond.Please check your network and modem cables.Another reason for the scan failure may also be another running pppoe process