Have you tried searching the forums?https://bbs.archlinux.org/viewtopic.php?id=144445
Cedar View is GMA600, while Poulsbo is GMA500, they're both the same PowerVR design with little differences.
Works fine here. mplayer2 though, maybe that makes a difference.
@Trilby: You used software decoders and encoders. Xaero252 wants to use hardware ones.
rc.local runs as root so you don't need to mess with sudo if you put stuff in there.
-vo vaapi is not enough. You also need -va vaapi
Without knowing which ethernet card is in there, it's impossible to help you. Post the output of lspci -nn on that machine.
https://bbs.archlinux.org/viewtopic.php?id=123092https://bbs.archlinux.o... Similar question: https://bbs.archlinux.org/viewtopic.php?pid=1074461
In what way do you need to distinguish them, and why do you need a modprobe.d/ file in the first place? If HDMI is default, but you want the analog to be, a simpleoptions snd_hda_intel index=1should do it.
If BCM4313 (pci-id 14e4:4727) is what you have, you don't need wl. You need to blacklist bcma and then you can use brcmsmac.