5

ntp.conf : need settings for a refclock using Symmetricom bc635PCI timing card

view full story
linux-howto

http://www.linuxquestions.org – Hello, I have setup a box using RHEL-5 inside a private network, no outside connections, and I've got a Symmetricom bc635PCI-V2 clock card installed and working. It's getting GPS time via IRIG-B feeding the PCI card from a TrueTime GPS receiver. I need to setup the NTP software to use the time from the PCI card. Which means I need to setup a /dev/refclock-? symbolic link to the driver as far as I know? I can't find any documentation on the bc635 card that associates the refclock to the driver. Does anyone know what settings I need to use in the server line of the ntp.conf file? Server 127.127.<type>.<unit> (anything else needed?) Thanks!! (HowTos)

dayu's picture
Submitted by dayu on 02/05/2010 – Made popular on 02/05/2010

Stories similar to ntp.conf : need settings for a refclock using Symmetricom bc635PCI timing card

SIS Mirage 3+ driver for ubuntu 3 years 15 weeks ago

Hi! I have a Fujitsu-Siemens V5535 laptop with a SIS Mirage 3+ graphic card, 671/672 chipset. I put ubuntu 9.10 on it, but I am not even able to settle the screen resolution higher than 800/600 . I tried different sollutions that i have found on the linux forum, but I was not successful.Can direct me in the right direction?

gma500 - iegd drivers poulsbo 3 years 14 weeks ago

Hi

Has anybody succesfully used/tried gma500 with the iegd drivers?

I have psb drivers, they suck, and I heard about iegd drivers tho I have searched high and low over 2 weeks now and can't find any confirmation whatsoever that anybody has even gotten them to work.

Please let me know if there is hope for my card!

//Robert

Hey all.

I just installed Slackware 12.2 and everything ran smoothly. Except, when i boot into it, login and try and start x, it doesn't work.

Code: Fatal server error: no screens found

Waiting for X srver to begin accepting connections giving up

memory video driver 3 years 14 weeks ago

I have have to write a video device driver, but rendering will happening in memory, not on a physical card. I already wrote a simple driver stripping out hardware piece code from an existent vodoo driver. I an install it, uninstall it but i dont know how to map it to a file /dev/mydevice_video

I'm having some problems. I just bought a Digitech Jamman. A looper for my guitar. It uses a CF-card of 1GB (type I). On my computer I have a lot of jamtracks in mp3 that I want to put on the CF-card. The problem is that my Jamman only reads wav-files. Nothing else. How can I convert my jamtracks to wav, uncompressed, 44.1khz, 16bit mono?

Newbie, no questions yet 3 years 14 weeks ago

Tired of not knowing anything except Windows. Bought a Dell mini with Ubuntu 8.04 installed on it and I'm working on learning Unix from the command line. This Forum ought to be helpful once I get a little further along.

I have tried Ubuntu, Mint, and even Crunchbang.

On all the *buntu clones I have the same problem with my nVidia 6100 card - no resolution higher than 800*600.

What am I doing wrong here ???I have seen a number of similar posts and cannot for the life of me find the simple answer that fixes this.

Fedora 12 x86_64 / ATI driver 3 years 15 weeks ago

I recently installed fedora 12, I have a AMD HD 5670 graphics card but how do I get a workable driver installed?

First of the 56xx series does not figure on the AMD/ATI website.

I then tried to download this driver, ATI Catalyst™ 9.12 for the 57xx series. The installation did seem to passthrough correctly however once I reboot'ed and tried to run:

LSPCI for windows? 3 years 16 weeks ago

My mom's computer has windows xp on it, which I'm using. The driver for the sound card is missing, it couldn't detect it automatically. Where can I get pciutils for windows?