4

No connection within the vlan????

view full story
linux-howto

http://www.linuxquestions.org – i set up vlan1 in cat2950 switch #config t #int vlan 2 #ip address 192.168.1.7 #no shutdown i then moved all the interface ports (port 1 - port 24) from the default vlan1 to the vlan2, with.... #int f0/1 #switchport mode access #switchport access vlan2 the problem is that with the above configuration, i connected 3 linux boxes on the switch but non of them could connect with each other. when i did a ping, it says "destination unreachable" what am i missing out here, and whats the fix? i assigned static ip address to these boxes, also there's no router in this network by the way (HowTos)