13

[lubuntu] Want GuestOS to be Network Visible

view full story
linux-howto

http://ubuntuforums.org – Heya All, I am running VirtualBox 3.2.8_OSE r64453 on Lubuntu 10.10, running an Ubuntu Server 12.04 install, and wish to allow communication from host to guest, as well as guest to network. However, while the guest can communicate with the host, that is as far as communications go. I have the guest set up with two adapters; one NAT, and one Bridged (tried Host-Only as well), but to no avail. I only get that the packets are filtered when I try pinging any address of the guest. The network set up is as follows: Host eth0 192.168.0.64 NAT-Gate 10.0.2.2 NAT-Guest eth0 10. (Hardware)

linuxfan's picture
Submitted by linuxfan on 06/10/2012 – Made popular on 06/10/2012

Stories similar to [lubuntu] Want GuestOS to be Network Visible

I have installed and setup a guest Mageia 2 on VirtualBox which I plan to use as a development web server. My host is Windows 7 (64-bit) and I want to access the web sites from this host web browser.

I have set VirtualBox Network setting of Mageia guest OS to "Bridged Adapter" and I took the IP address of eth0 and entered that on my host web browser.

I have virtualbox 4.1 on a ubuntu 12.04 host. On my host I have a virtual interface eth0:1 configurend as 10.0.1.1. I have a few virtual machines using bridged adapters, configured in the 10.0.1.0 net which I can reach (ping, ssh, ...) from my host via the virtual interface.

Now I installed an ubuntu server 12.04 in a virtual box, again using bridged adapter, but I can not reach that host.

I have several virtualbox applicances (windows, linux) each of them configured with two network adapters:

NAT for acessing the internet host-only for hosts <> hosts and hosts <> guest communication

Problem is, I can conly communicate by ip address. I want to communicate by hostname, ie, I want to be able to reach any host from any other host (or guest) by using the hostname.

I have an Ubuntu Server machine which is acting as a VM host for KVM guests made with vmbuilder. I want to expose the VM's to the network. Currently, the VM guest can get out to the network, and I can get in to the VM from the host, but I can not access the VM from the outside.

On the host, I have set up a bridge br0 which includes the physical interface.

The title sums up the situation and here are the specifics:

website on the guest box is configured correctly in Apache and responds fine in browser on that machine guest box is set to use bridged adapter mode for network I've made an entry in my Win7 host file with the IP and domain of the site which I have configured in Apache on the guest CentOS VM Apache on the guest box responds to a request

I'm running VirtualBox 4.2.4 on a Windows 7 x64 host. I installed a Xubuntu guest system. The VM has network access through NAT. VirtualBox is configured to act as DHCP server (setup by default) and listens on 192.168.56.100.

How this aliasing worked 10 weeks 5 days ago

I am trying to do ip aliasing on my ubuntu 12.04 guest and it was not working.

host 11.x.11.2

guest 11.x.11.3

guest is using bridge networking with host.

on guest specified

auto eth0 iface eth0 inet static address 11.x.11.2 netmask 255.255.255.0 network 11.x.11.0 broadcast 11.x.11.255 gateway 11.x.11.1

auto eth0:0 iface eth0:0 inet static address 11.x.11.3 netm

Hi there. I have a strange problem here. I've set up ubuntu server 10.04 x64 with kvm and bridged networking and installed win server 2008 as a guest os. The guest os has full access to the network including lan/wan but the host os can only reach my lan and not the wan.

Hi there, I have a problem with guess host use Bridged Network on VMWare. I install the guest OS CentOS (192.168.1.37 )on host Windows XP SP2 (192.168.1.33), I try to use bridged-connection so the guess can appears as an additional server on the same physical Ethernet network as my host. My problem is: