1

lmsensors sending high temp without CPU under load at all

view story
linux-howto

https://bbs.archlinux.org – Hey,it seems like I actually fixed it. I did a initram.fs rebuild like it is described here:https://wiki.archlinux.org/index.php/In … Setting.29Maybe my tip was right that the intel GPU was doing some zombie operations The temperatures are back to normal now:[i42n@laptop-st ~]$ sensors thinkpad-isa-0000 Adapter: ISA adapter fan1: 1977 RPM acpitz-virtual-0 Adapter: Virtual device temp1: +41.0°C (crit = +98.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +41.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +37.0°C (high = +86.0°C, crit = +100.0°C) Co (HowTos)

Tagmego's picture
Submitted by Tagmego on 10/22/2012

Stories similar to lmsensors sending high temp without CPU under load at all

I never get anything much below the mid-40s:$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +44.0°C (crit = +100.0°C)

thinkpad-isa-0000 Adapter: ISA adapter fan1: 567 RPM temp1: +44.0°C temp2: +0.0°C temp3: +44.0°C temp4: +0.0°C temp5: +0.0°C temp6: +0.0°C temp7: +23.0°C temp8: +0.0°C

coretemp-

Here's the output of sensors command:

thinkpad-isa-0000 Adapter: ISA adapter fan1: 3414 RPM

coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +50.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +47.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +49.0°C (high = +86.0°C, crit = +100.0°C)

acpitz-virtual-0 Adapter: Virtual device temp1: +49.0°C (crit = +99.0°C)

Hello,

I have a problem on my new Laptop : Samsung NP530U4B. The processor is an Intel Core i5-2467M.

I have installed bumblebee-git sensors thinkpad-isa-0000 Adapter: ISA adapter fan1: 3589 RPM

coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +59.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +54.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +55.0°C (high = +86.0°C, crit = +100.0°C)

acpitz-virtual-0 Adapter: Virtual device temp1: +58.0°C (crit = +98.0°C)su

I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast.

Fan Speed Control question(s) 19 weeks 5 days ago

Hi!I am trying to control the fan on an old hp Compaq nc2400. After reading in the wiki, I have done the following:sensors-detect produces the following:Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)Well, ok...

Im using Linux mint 14 Cinnamon 64bit. I have problem with fan its always Running-ON i dont know why can someone please help

Linux core-Inspiron-N7010 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

Sensors

acpitz-virtual-0 Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C)

radeon-pci-020

Temperature, sensors 1 year 19 weeks ago

I installed sensors, but this don't show me the 4 temperatures of my 4 cores, I have a Intel Core i5,

Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C)

coretemp-isa-0000 Adapter: ISA adapter Core 0: +40.0°C (high = +95.0°C, crit = +105.0°C) Core 2: +47.0°C (high = +95.0°C, crit = +105.0°C)

I followed the same procedure in ot

Dear all,

I am running Fedora11 on a brand new HP Pavilion Elite, and the fans just won't stop running at full speed.

I have tried

Code: yum install lm_sensors which told me lm_sensors was already installed.

Next I did

Code: sensors-detect taking the default answer to all questions asked.

Doing