7

laptop fan is always ON using linux mint 14 [migrated]

view full story
linux-howto

http://stackoverflow.com – Im using Linux mint 14 Cinnamon 64bit. I have problem with fan its always Running-ON i dont know why can someone please help Linux core-Inspiron-N7010 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) radeon-pci-0200 Adapter: PCI adapter temp1: +75.5°C coretemp-isa-0000 Adapter: ISA adapter Core 0: +54.0°C (high = +95.0°C, crit = +105.0°C) Core 2: +52.0°C (high = +95.0°C, crit = (HowTos)

fooubuntu's picture
Submitted by fooubuntu on 01/12/2013 – Made popular on 01/12/2013

Stories similar to laptop fan is always ON using linux mint 14 [migrated]

Hello,

I have a problem on my new Laptop : Samsung NP530U4B. The processor is an Intel Core i5-2467M.

I never get anything much below the mid-40s:$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +44.0°C (crit = +100.0°C)

thinkpad-isa-0000 Adapter: ISA adapter fan1: 567 RPM temp1: +44.0°C temp2: +0.0°C temp3: +44.0°C temp4: +0.0°C temp5: +0.0°C temp6: +0.0°C temp7: +23.0°C temp8: +0.0°C

coretemp-

Fan Speed Control question(s) 19 weeks 5 days ago

Hi!I am trying to control the fan on an old hp Compaq nc2400. After reading in the wiki, I have done the following:sensors-detect produces the following:Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)Well, ok...

I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast.

hi,I am trying to add the CPU temperature to my conky using grep on sensors command, which gives me this:mattia@CB-Mattia:~$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +72.0°C (crit = +85.0°C) temp2: +55.0°C (crit = +82.0°C)I also did sensors-detect and then loaded, as suggested, coretemp module, after that I have:mattia@CB-Mattia:~$ sensors acpitz-virt

Hey,it seems like I actually fixed it.

Here's the output of sensors command:

thinkpad-isa-0000 Adapter: ISA adapter fan1: 3414 RPM

coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +50.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +47.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +49.0°C (high = +86.0°C, crit = +100.0°C)

acpitz-virtual-0 Adapter: Virtual device temp1: +49.0°C (crit = +99.0°C)

The Temperature Monitor in lxpanel (I'm using Lubuntu 12.10) is automatically detecting one of my sensors but I would like to give it an alternate one.

Here is the output of sensors:

Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C)

coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +90.0°C) Core 2:

Dear all,

I am running Fedora11 on a brand new HP Pavilion Elite, and the fans just won't stop running at full speed.

I have tried

Code: yum install lm_sensors which told me lm_sensors was already installed.

Next I did

Code: sensors-detect taking the default answer to all questions asked.

Doing