This tutorial will explain how to clear ARP table in bluecoat proxyAV devices this is very useful if you change proxy device or any other devices which provides routing.
Procedure to follow
Login in to proxyav device
Now you need to click on Advanced from left side menu
Once it opens Advanced settings scree click on ARP table
In ARP table screen you can clear ARP table
This article provides information about the support extended by Juniper firewalls for MPLS.
As of ScreenOS 6.3.0 , 6.2.0r3 onwards:
Firewalls that are running in the Route (Layer 3) mode do not support or cannot pass MPLS packets.
Firewalls that are running in the Transparent (Layer 2) mode can pass MPLS packets, when the VLAN1 bypass-non-ip option is enabled (set interface vlan1 bypass-
How do I use a wildcard mask in VPM policy (Bluecoat proxy)
Solution
To place a wildcard mask into the VPM policy object, use (.*). An asterisk only (*) will not work.
For example, "http://www.mrbean.com/*/xyz" won't work.
This tutorial will explain How to Erase the Juniper firewallSystem Configuration Using the CLI.This solution applies to all Firewall ScreenOS versions.
Note: Only the configuration file is reset to the default status.
This article provides a configuration to authenticate SSG/ISG administrators by using TACACS+, instead of local logins.ACS v5.x is a Linux-based VM with a completely new user interface and structure.
This tutorial will explain How to redistribute routes in the configured OSPF area in Screenos (Juniper Firewall).
Procedure to follow
Configure an access list for the network to redistribute in OSPF:
WebUI:
Go to Network > Routing > Virtual Router > Access Lists.
CLI:
Set vr
set access-list
set access-list Permit ip
exit
Configure a Route Map and match the access-list t
Submin provides a web-based admin interface to your svn repositories.
Submin Features
User/group management
User/group permissions management per path
SVN repositories creation
Config files for apache2 cgi and wsgi created automatically
Authentication via htpasswd/svn authz
Authentication synced to svn (and trac)
Tested with browsers:
Firefox (2,
Using Old Debian Versions In Your sources.list
You might be in a situation where you have a sytem with an old Debian
version that has reached end of life, like Etch, Sarge, Woody, etc.,
and a distribution upgrade is not an option for you (maybe because you
have customized the system so much that you fear breaking the system by
doing a distribution upgrade).
The Windows users have a new client "Juniper Pulse" to connect to the Juniper VPN server.
On Linux, what VPN client do we have to connect to that Juniper VPN, with maximum compatibility?
Please mention the necessary parameters that have to be provided.
Email this page
