When I try to start ipsec to load new configuration i get:
Starting strongSwan 4.3.5 IPsec [starter]...
/etc/ipsec.conf:41: unknown keyword 'plutoopts' ["--interface=eth0"]
unable to start strongSwan -- fatal errors in config
who can give me something advise, thanks!
my configure file was below:
1# ipsec.conf - strongSwan IPsec configuration file
3# basic configuration
I have a host I am trying to setup for ipsec. But I am finding some errors in the log that don't make much sense to me.
The system are Rhel 5.5 boxes. I followed RHEL's IPSec deployment directions to setup a host to host IPSec connection between hosts on two different LAN's. One host has a bonded interface. After running tcpdump I don't see any traffic going to the second host.
I have share some part of IpSec configurations which include actual Ip assigment.
I would like to know if it is possible not give actuall ip.Instead giving such as 0.0.0.0 as generic IP.
When I have changed the actuall IP 22.214.171.124 with 0.0.0.0 as follow it does not work.
Add: 126.96.36.199 %any 0.0.
This is a guide on setting up an IPSEC/L2TP vpn server with Ubuntu 14.04 using Openswan as the IPsec server, xl2tpd as the l2tp provider and ppp or local users / PAM for authentication. It has a detailed explanation with every step.
I am using vpnc on Fedora to get into a VPN however I am facing problems w.r.t the parameters that need to be supplied.
Enter IPSec gateway address: //This address is known
Enter IPSec ID for .....: //I do not know what goes here
Enter IPSec secret for ----: //I do not know what goes here
Enter username //I know what goes here
Enter password for //I know what goes here
I am very new in Ubuntu and openswan. I have two virtual machines with installed Ubuntu 10.4 on a computer. i have also checked to see i the eth0 is bridge or not (it is not part of bridge). I want to make a tunnel between these two virtual machines.
I'm now configuring strongswan server and want to test using strongswan android client.
I configured ipsec.conf, strongswan.conf and ipsec.secrets as follows and I could not login from the android client.
Can anybody please give me some advice or suggestion what I did wrong?