2

interpreting a RADIUS packet

view story
linux-howto

http://serverfault.com – I am trying to interpret a RADIUS packet. 0x04 12 00 2e 01 12 32 11 43 c1 23 43 bc 23 11 54 f1 ad 1a 16 28 06 00 00 00 02 29 06 00 00 00 11 2a 06 ff ff ff ff 2b 06 ff ff ff ff I have gotten this far Code : Accounting Request (0x04) Packet Identifier : 0x12 Length : 46 Authenticator : 01 12 32 11 43 c1 23 43 bc 23 11 54 f1 ad 1a 16 Attribute Value Pairs: AVP Type - 0x28 (40) - Acct-Status-Type Length - 6 Value - 02 - Stop. AVP Type - 0x29 (41) - Acct-Delay-Time Length - 6 Value - 11 (17) AVP Type - 0x2a (42) - Acct-Input-Octets Length - 6 Value (HowTos)

u85500's picture
Submitted by u85500 on 08/06/2012

Stories similar to interpreting a RADIUS packet

When I log the length of a echo-request packet,

iptables -A OUTPUT -p icmp -m icmp --icmp-type 8 -j LOG

I saw the length was LEN=84, but in wireshark, the captured packet size was 0x60, why does it differ?

Another sniff:16:17:25.686360 ARP, Request who-has 192.168.1.1 tell 192.168.1.105, length 28 16:17:26.689702 ARP, Request who-has 192.168.1.1 tell 192.168.1.105, length 28 16:17:27.693010 ARP, Request who-has 192.168.1.1 tell 192.168.1.105, length 28 16:17:28.713027 ARP, Request who-has 192.168.1.1 tell 192.168.1.105, length 28 16:17:29.716363 ARP, Request who-has 192.168.1.1 tell 192.168.1.105, l

I have 3 boxes set up as shown:

The DFW box can communicate to the SFO / internet just fine, and I send files AUS -> DFW.

Hi, Apologies is this has been answered before. Just picked up a Galaxy S2 with ice cream OS. I set up an email acct incorrectly, then set up another acct the right way. Am unable to delete the 1st acct. On gingerbread you just held your finger on the acct and then selected delete, but this option doesn't appear available on this OS. Can someone tell me what I am doing wrong? Cheers, Tim

Max password size in AIX 6.1 20 weeks 20 hours ago

I found on the AIX documentation some rules to set about passwords length :

minlen Defines the minimum length of a password. The value is a decimal integer string. The default is a value of 0, indicates no minimum length. The maximum value allowed is PW_PASSLEN attribute. This attribute is determined by the minalpha attribute value added to the minother attribute value.

Hi,

I have a issue, I need to loop through a comma delimited file and check for the length which exceeds specified length , if Yes truncate the string. But my problem is , I do not have to check for all the fields and the field lenght is not same for all the fields.

For ex:

Say my line ahjdh,dfhkajhdf,adhklf,eiour

say I need to check length only for 2nd and 4th and max length for 2nd is 6

180.113.228.104.46607 > 31.3.241.230.65511: Flags [P.], cksum 0x4e10 (correct), seq 1, ack 0, win 512, length 0 03:11:47.878625 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 31.3.241.230.65511 > 180.113.228.104.46607: Flags [R], cksum 0x5025 (correct), seq 0, win 0, length 0 03:11:47.878626 IP (tos 0x0, ttl 114, id 28727, offset 0, flags [none], proto TCP (

Hi,

Could any one suggest what's the issue ..?

HCI driver is not getting the event packet from the bluetooth chip firmware sometimes. The details are as follows:

Hardware used: tegra Harmony platform from nvidia BT chip used : Bluecore 4 Software : ubuntu 9.10, 2.6.32.25 #1 SMP PREEMPT arm7l GNU/Linux Architecture : ARM BT Problem description: h4_recv function in Hci driver is not getting

I am expecting lots of problem trying to make mutt work in Ubuntu 12.04.