14

Intel 330 SSD running slow, how can I improve performance?

view full story
linux-howto

http://askubuntu.com – I just installed a new Intel 330 60 GB SSD into my HP Mini 2140 laptop. But it's not going as fast as expected and my hdparm results aren't looking very good compared to SSD benchmarks at: https://wiki.archlinux.org/index.php/SSD_Benchmarking My results and info are below. hdparm results: justin@justin-HP-2140:~$ sudo hdparm -Tt /dev/sda /dev/sda: Timing cached reads: 1130 MB in 2.00 seconds = 564.50 MB/sec Timing buffered disk reads: 372 MB in 3.01 seconds = 123.53 MB/sec justin@justin-HP-2140:~$ hdparm info: justin@justin-HP-2140:~$ sudo hdparm -I /d (HowTos)

funckax's picture
Submitted by funckax on 05/23/2012 – Made popular on 05/23/2012

Stories similar to Intel 330 SSD running slow, how can I improve performance?

Hello,

I have a new PC (Asrock 970 Extreme4, FX-8120, 8GB RAM, SSD Samsung 840 128GB) with Ubuntu 12.04. I did the following: Mounting partitions with the options noatime and discard Minimise writes with tpmfs in RAM Enable Automatic TRIM => Tested OK Change I/O Scheduler => Tested OK Change swappiness

SSD firmware is up-to-date M/B firmware is up-to-date

Now I test the SSD p

Hello

I have an Asus 1215b and I have changed the HDD with an SSD Intel 330 Series 120 GB. I am using Xubuntu 12.4.

The problem is that the netbook is moving slowly.

I have two disks, SSD (Samsung 830 128GB) and normal HDD (WD 1TB) and Ubuntu 12.10 installed.AHCI set in the BIOS. I have a problem with extremly slow copying in all directions (Samsung->Samsung, WD->WD, WD->Samsung and Samsung->WD).

I haven't seen anything like this before.  Upon rebooting:% hdparm /sbin/hdparm: /sbin/hdparm: cannot execute binary fileThe permissions are fine:ls -l /sbin/hdparm -rwxr-xr-x 1 root root 105440 Nov 3 02:47 /sbin/hdparmIf I capture its md5sum:% md5sum /sbin/hdparm 321ff7b32611a82c719ec7f7a7b5a67c /sbin/hdparmNow, I reinstall and everything is fine; note the DIFFERENT md5sum:% sudo pa

I am running a Debian 6.0.6 (before you ask). I have a regular desktop computer, nothing fancy... but when I copy a file using nautilus I am getting 10MB/s copy speed and the system is completely stuck!

[APP] Slap Justin Bieber 35 weeks 3 days ago

Are you stressed?

Slap Justin Bieber's face!

https://play.google.com/store/apps/details?id=com.martinvillar.android.s... er

Click on any of the three buttons on the left to play Justin's statements.

Click on his face and see what happens.

You can share an app recommendation with the button on the header.

This application is against violence in any area of ​&#820

Recently my Debian Linux server has been experiencing slow web server response times.

Very slow Disk IO on RHEL4 2 years 48 weeks ago

Hi, I have an HP proliant server where i have internal hard disks and also HP MSA external storage. The IO rate is very very slow on internal hard disks and also on MSA storage. Please se bellow output.

Code: [root@dwdb01 ~]# hdparm -Tt /dev/cciss/c0d0p1

/dev/cciss/c0d0p1:

Laptop doesn't power down 8 weeks 2 days ago

Things should be working as outlined in the wiki: https://wiki.archlinux.org/index.php/Sy … managementIf you think it's important, you can add a line about halt, although it's already mentioned in systemd FAQ https://wiki.archlinux.org/index.php/Sy … r_stays_onThere's also https://wiki.archlinux.org/index.php/Al … o_ShutdownObviously you can use an alias e.g.alias halt='sudo sy