5

IKE Phase 1 Aggressive Mode exchange does not complete

view full story
linux-howto

http://serverfault.com – I've configured a 3G IP Gateway of mine to connect using IKE Phase 1 Aggressive Mode with PSK to my openswan installation running on Ubuntu server 12.04. I've configured openswan as follows: /etc/ipsec.conf: version 2.0 config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn net-to-net authby=secret left=192.168.0.11 leftid=@left.paxcoda.com leftsubnet=10.1.0.0/16 leftsourceip=10.1.0.1 right=%any rightid=@right.paxcoda.com rightsubnet=192.168.127.0/24 rightsourceip=19 (HowTos)