I'm new to C++ and I'm having some trouble trying to compile my program. I have a Driver.cpp file which contains main(), and 2 header files each with corresponding .cpp files. They are all in the same directory. The Driver.cpp file only calls a function in one of the other header files, which does the rest of the work.
Hello,
I'm close to giving up my plans of installing 12.04, because I can't get my wlan chip to work.
It's a Broadcom b43225, and I've tried lots of things already.
The same chip works under Bodhi Linux 1.4, which is based on Ubuntu (currently 10.04).
i have a Asus x501a rt3970 wireless chip and i installed thier rt2860 driver as the wifi driver using rt2800pci build was not very good bad signal etc. i went though the read me and compiled it etc and now i have it installed (rt2860) and working.
I'm using Ubuntu 12.04 LTS.
I'm not sure if it is the CPU (i7) fan or the video card fan.
I've tried using lm-sensors & fancontrol
sudo sensors-detect
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `w83627ehf':
* ISA bus, address 0x290
Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9)
Driver `coretemp':
* Chip `Intel digital ther
I have a laptop (HP 5310m) released around 2010 and there appears to be no support for the fan/temp sensor chipset.
When I run sensors-detect it comes up with an unknown chip with ID 0x4501.
Does anyone know what this chip is?
If so, is there a module driver being written for it?
Any help appreciated,
Output of sensors-detect:
Some Super I/O chips contain embedded sensors.
OK. Big problem. Upgraded to Waldorf, just awesome. However, my USB wireless dongle does not have drivers for this new of a Linux Kernel. It is the only method of acquiring internet I have for this old laptop. Here's what I have found out and tried, hopefully you guys can help.
Hi,
Could any one suggest what's the issue ..?
HCI driver is not getting the event packet from the bluetooth chip firmware sometimes.
The details are as follows:
Hardware used: tegra Harmony platform from nvidia
BT chip used : Bluecore 4
Software : ubuntu 9.10, 2.6.32.25 #1 SMP PREEMPT arm7l GNU/Linux
Architecture : ARM
BT Problem description: h4_recv function in Hci driver is not getting
Hi real new beginner here, apologies for this if already answered elsewhere, got tired of windows got new base unit so took the plunge and installed Ubuntu 12.4lts - so far so good, tried to set up screen res to previous settings and no way - only showed 'unknown' and then 1024 x 768 res.
I installed Ubunto 12.04 onto a brand new Toshiba Satellite C850 64 bit laptop. Wlan does not work, Tries to connect, gives up after some time. $Windows7 works 100%.
There appears to be a problem with the driver. The actual hardware is a rtl8188ce chip.
Email this page
