6

How i configure a pppoe conection over wlan0?

view full story
linux-howto

http://forums.fedoraforum.org – hello, i'm Guillermo from Chile, and I'm new to Fedora, but I've been trying linux since a time. The problem is that i can't get a pppoe conection working over a wireless network, in windows I have to connect to the router first, and then put in my user and password to get connected, but i don't know how to do this on fedora, i get connected to the router through network manager, and ping is ok, but when i try to make a new xDSL connection i don't know how to make it work through the wireless network that is established and working with my router, any help will be considered, thanks PD: sorry, but as you may know english is not my native language (HowTos)

colm's picture
Submitted by colm on 02/18/2010 – Made popular on 02/18/2010

Stories similar to How i configure a pppoe conection over wlan0?

Hello

I use pppoe connection over wireless network, for long time I've used console, so I didn't had any problem with it, BUT - after installing gnome, I can't connect to the wireless ISP. On my network manager I see my wireless network, I can connected to it, but when I do it, I don't see DSL connection on my menu, If I only connect cable to it, DSL connection is showing again.

Hi,

I am using HP laptop with fedora 17. I use wireless network, when ever my Wireless router turnsoff fedora showing a popup message asking for Wireless network password and the popup will not close until I manually cancel it.

Hi,

I'm having a problem getting a PPPoE connection to work over a wireless network.

My internet provider uses PPPoE to authenticate over the wireless network. My USB wireless device can connect to the WAP, but the PPPoE is where I start having problems. If I try to set up the PPPoE it tries to connect on the eth port instead of the wlan.

Hi! I've had this problem for a long time now. Maybe someone here can help me solve it.

My computer sees the wireless network at home, ChinaNet-zbgJ. The dsl router is brand new, they just changed things to make it faster. I have the password, it is written on the router.

Greetings,

Need some information on how to setup the router.

I don't know if it is a standard way, but below is how my ISP provides Internet access.

I have a LAN cable coming in and the LAN connection is configured as follows -

IP - 169.254.xx.xx subnet - 255.255.0.0 gateway - 192.168.0.1 DNS - some IPs

And then there is a PPPoE connection that uses a username and password and (probably) get

Fedora 10 and TL-WN321G 3 years 24 weeks ago

Hello, I had success with this card so I thought I'd post this where someone might read it and go the same route as me. Last week, I installed Fedora 10 on an older IBM T23 Think Pad. No issues at all using the NetInst CD. I got all current updates for it, too. I surfed the Internet looking for a wireles USB adapter that might work and found the TP-LInk WN321G.

I have the following set up:

Server (CentOS 5) -eth0: connected to DLink wireless switch LAN port -eth1: connected to local network

The server is running a PPPoE server (specifically, rp-pppoe). I also have iptables forwarding eth1 to eth0.

I have a computer running Windows XP connected to the wireless switch (LAN) as well.

Hi all,

Any help welcome before I smash my laptop and/or my router :)I have a Billion wired/wireless residential router connected to ADSL. Wireless with WPA is setup and working fine for ages. An Acer laptop with Windows Vista and a Samsung Galaxy phone can happily connect to the router over wireless in a room a few meters away from the router.My laptop (Acer Aspire 4710) with #!