4

Home wireless router setup [migrated]

view full story
linux-howto

http://serverfault.com – have a DSL modem setup with 192.168.1.1 local IP. Everything working fine. Then have a linksys wireless router that I have connected to the DSL modem. I have enabled DHCP on the wireless router, and have assigned 192.168.107.1 IP address to this router, with 255.255.255.0 as the mask. Now, from the wireless router, I can ping to everywhere -- which means the connection between the wireless router and the internet is fine. However the connection between my machine and the internet doesn't work -- I get an IP assigned but nothing else works. Anything I'm missing? The router is configured to as (HowTos)

u85500's picture
Submitted by u85500 on 03/19/2012 – Made popular on 03/19/2012

Stories similar to Home wireless router setup [migrated]

Hi all

Internet Connection:- DSL 4MB/4MB (up and down) Static IP (for home use) --------------

Wiring connection: PC -> Router -> Modem -> ISP

Modem and router are supplied by ISP.

Modem: Comtrend Model SR-2010 (4 wire)

Router - wire

The modem is provided with 4 sockets, only one being used and connected to the router.

I'm prepared to set up an addional network

I get disconnected from my wireless router a couple times a day.

Wireless router for home use. 40 weeks 5 days ago

Hi all,

I'm prepared to set up a 2nd network using wireless router, to be connected to a wire modem which is supplied by ISP, There is already a wire router connected to the said modem, also supplied by ISP.

Internet connection 4MB/4MB DSL, up and down Static IP

One PC is located at about 2 feet from the wireless router, the former on table top and latter under table.

I have a question. I just bought an internet router which also has wireless connection and my notebook also has wireless LAN. I was able to connect the computer to the internet router very easy. But i dont know how to make it work wirelesss under fedora linux 12...i mean how should i setup the connection to the router so i will be able to have a wireless connection?

I'm trying to access & configure my wireless router's options.

The wireless router is a Linksys E2000 and the default gateway's IP address is 192.168.33.1

I've gotten into the router setup by simply typing this address into Internet Explorer and using the particular router's default username and password.

I have a residential router/gateway/ADSL modem with a netbook and laptop both running #! connected wirelessly. I have an Ubuntu server connected to the router too via Ethernet. I have configured the router to give the same IP address to each machine based on Ethernet or wireless MAC address. Each of the computers can see the router and the gateway and the Internet. The two wireless #!

I just bought a TRENDNET TDM C4000 (=modem/ wiredrouter) and got it working. If I connect my computer with through the ethernet port directly, the internet will work. However, when I try connecting the ends of the ethernet cable on the modem and my wireless router, it's not transmitting. I know I set up the wireless router correctly because it worked with my previous modem.

OK So I moved today and had to purchase a new wireless router. Without changing any setting I connected using WiCd wirelessly from my last residence.

I now purchased a Linksys WRT160N wireless router to use however cant connect to that wired or wireless. well let me specify, WiCd states its connected but no internet connection is found in firefox.

I have a residential router/gateway/ADSL modem with a netbook and laptop both running #! connected wirelessly. I have an Ubuntu server connected to the router too via Ethernet. I have configured the router to give the same IP address to each machine based on Ethernet or wireless MAC address. Each of the computers can see the router and the gateway and the Internet. The two wireless #!