5

Fatal: module iscsi_trgt not found -- trying to get my iscsi target to run on debian

view full story
linux-howto

http://serverfault.com – Sorry about the formatting below... Linux Microknoppix 2.6.39.3 #21 SMP PREEMPT Sat Jul 23 09:48:39 CEST 2011 i686 GNU/Linux modprobe iscsi_trgt results in FATAL: Module iscsi_trgt not found. so did a # apt-get install module-assistant debhelper then # m-a a-i iscsitarget Fails with error log: iscsitarget-source.buildlog.2.6.39.3.1 contents: dh_clean -k dh_clean: dh_clean -k is deprecated; use dh_prep instead #/usr/bin/make -C /usr/src/linux KERNEL_SOURCES=/usr/src/linux MODVERSIONS=detect KERNEL=linux-2.6.39.3 KDIR=/usr/src/linux SUBDIRS=/usr/src/modules/iscsitarget/kern (HowTos)

taskli's picture
Submitted by taskli on 08/10/2012 – Made popular on 08/10/2012

Stories similar to Fatal: module iscsi_trgt not found -- trying to get my iscsi target to run on debian

Hello allI have a problem compiling the iscsitarget-1.4.20.2.tar.gzFollowing the how to i install kernel source + development toolsthen i run make an... [by antonaras]

Hello!

I have

Quote:

Ubuntu 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

And I am trying to setup an simple iscsi target.I give the following command to install:

Quote:

sudo apt-get install iscsitarget iscsitarget-source iscsitarget-dkms

Quote

missing modversions.h on linux 18 weeks 19 hours ago

I have configured and built linux kernel 2.6.27 successfully, with module supported enabled. But when I am trying to build another program (kernel module) that needs include/linux/modversions.h, it cannot find the file.

my question is: besides enabling the module support in linux kernel config, is there anything else I need to do to generate/get the modversions.h?

Thanks.

When I update to the latest kernel in OS 11.1, I receive, as part of the total messages:

------------------------------------------------

Kernel image: /boot/vmlinuz-2.6.27.39-0.2-default Initrd image: /boot/initrd-2.6.27.39-0.2-default Root device: /dev/disk/by-id/ata-WDC_WD6400AACS-00G8B0_WD-WCAUF1142948-part5 (/dev/sdb5) (mounted on / as ext3)

my os is centos

kernel is 2.6.18-92.1.17.el5xen.

fuse version is fuse-2.7.4 I compiled it like this：

./configure --enable-kernel-module --with-kernel=/usr/src/linux make &&　make install

then "modprobe fuse",but it warned like this:

FATAL: Error inserting fuse (/lib/modules/2.6.18-92.1.17.el5xen/kernel/fs/fuse/fuse.ko): Operation not permitted

but I did it as root.

an

I have 2 ubuntu server running the same version 12.0.4 LTS

On one of them I can run sudo modprobe fuse normally on the other this gives back the error FATAL: Module fuse not found.

Hello,

I am using openSuSE 11.2 on a VGN-AR41L. I have also erased the preinstalled Home Vista (what a pleasure). Now to my problem. My system boots correctly but if I press the <ESC> key while booting I can see the following messages:

"Doing fast boot FATAL: mbcache module not found FATAL: ahci module not found "

Just for this card ALPHA AWUS048NH for better injection with Airmon-ng suite and following the instructions in there I cannot install the driver. My system Linux bt 2.6.30.9 #1 SMP Tue Dec 1 21:51:08 EST 2009 i686 GNU/Linux

when I do make file this is the error I get

Code: root@bt:~/Linux# make

I rebooted a compiled kernel 3.1.0, and those are the errors that I am getting:

linux-dopx:/usr/src/linux-3.1.0-1.2 # make install sh /usr/src/linux-3.1.0-1.2/arch/x86/boot/install.sh 3.1.0 arch/x86/boot/bzImage \ System.map "/boot"

Kernel image: /boot/vmlinuz-3.1.0 Initrd image: /boot/initrd-3.1.0 Root device: /dev/disk/by-id/ata-ST3250310AS_6RYNQEXY-part2 (/dev/sda2) (mo