1

Fan Speed Control question(s)

view story
linux-howto

https://bbs.archlinux.org – Hi!I am trying to control the fan on an old hp Compaq nc2400. After reading in the wiki, I have done the following:sensors-detect produces the following:Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)Well, ok... then I run$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +55.0°C (crit = +105.0°C) temp2: +46.0°C (crit = +105.0°C) temp3: +39.0°C (crit = +105.0°C) temp4: +27.4°C (crit = +105.0°C) temp5: +60.0°C (crit = +110.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +48.0°C (crit = +10 (HowTos)

missing's picture
Submitted by missing on 01/03/2013

Stories similar to Fan Speed Control question(s)

I never get anything much below the mid-40s:$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +44.0°C (crit = +100.0°C)

thinkpad-isa-0000 Adapter: ISA adapter fan1: 567 RPM temp1: +44.0°C temp2: +0.0°C temp3: +44.0°C temp4: +0.0°C temp5: +0.0°C temp6: +0.0°C temp7: +23.0°C temp8: +0.0°C

coretemp-

hi,I am trying to add the CPU temperature to my conky using grep on sensors command, which gives me this:mattia@CB-Mattia:~$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +72.0°C (crit = +85.0°C) temp2: +55.0°C (crit = +82.0°C)I also did sensors-detect and then loaded, as suggested, coretemp module, after that I have:mattia@CB-Mattia:~$ sensors acpitz-virt

Fan always on on HP 8440p 32 weeks 1 day ago

Hi everybody,I know that this topic has been discussed several times, but I can't find a solution that works for me, maybe because it's a very hardware-dependent problem.So, as many others, the fan of my laptop is running all the time (not full speed, but always running), despite the cpu is not that warm at all.Sensors, for instance, says:acpitz-virtual-0 Adapter: Virtual device temp1:

Temperature, sensors 1 year 19 weeks ago

I installed sensors, but this don't show me the 4 temperatures of my 4 cores, I have a Intel Core i5,

Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C)

coretemp-isa-0000 Adapter: ISA adapter Core 0: +40.0°C (high = +95.0°C, crit = +105.0°C) Core 2: +47.0°C (high = +95.0°C, crit = +105.0°C)

I followed the same procedure in ot

Im using Linux mint 14 Cinnamon 64bit. I have problem with fan its always Running-ON i dont know why can someone please help

Linux core-Inspiron-N7010 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

Sensors

acpitz-virtual-0 Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C)

radeon-pci-020

Hey,it seems like I actually fixed it.

Dear all,

I am running Fedora11 on a brand new HP Pavilion Elite, and the fans just won't stop running at full speed.

I have tried

Code: yum install lm_sensors which told me lm_sensors was already installed.

Next I did

Code: sensors-detect taking the default answer to all questions asked.

Doing

Hello,

I have a problem on my new Laptop : Samsung NP530U4B. The processor is an Intel Core i5-2467M.

Here's the output of sensors command:

thinkpad-isa-0000 Adapter: ISA adapter fan1: 3414 RPM

coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +50.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +47.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +49.0°C (high = +86.0°C, crit = +100.0°C)

acpitz-virtual-0 Adapter: Virtual device temp1: +49.0°C (crit = +99.0°C)