5

F12 Mobile broadband ZTE MF628

view full story
linux-howto

http://forums.fedoraforum.org – I'm completely lost. Thought i was'nt a newbie anymore, but obviously i am. I have a USB HSDPA modem ZTE MF628. Figured out how to change from USB CD device tot modem, but still cannot get it to work, Especially how to get it showing up in NetworkManager as a mobile broadband device. Please give me a hint how to get it working. Some output (after usb_modeswitch): Code: $ lsusb Bus 004 Device 002: ID 0a5c:2101 Broadcom Corp. A-Link BlueUsbA2 Bluetooth Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0ac8:c326 Z-Star Microelectronics Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 046d:c526 Logitech, Inc. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 006: ID 19d2:0015 ONDA Communication S.p.A. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Code: # dmesg | grep -i usb usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31.6-145.fc12.i686 ehci_hcd usb usb1: SerialNumber: 0000:00:10.4 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31.6-145.fc12.i686 uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31.6-145.fc12.i686 uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31.6-145.fc12.i686 uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found usb 1-4: new high speed USB device using ehci_hcd and address 4 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb 1-4: New USB device found, idVendor=0ac8, idProduct=c326 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-4: Product: Namuga 1.3M Webcam usb 1-4: Manufacturer: Vimicro Corp. usb 1-4: configuration #1 chosen from 1 choice usb 2-1: new full speed USB device using uhci_hcd and address 2 usb 2-1: New USB device found, idVendor=19d2, idProduct=0015 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: ZTE CDMA Technologies MSM usb 2-1: Manufacturer: Qualcomm, Incorporated usb 2-1: SerialNumber: Data Interface usb 2-1: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: New USB device found, idVendor=046d, idProduct=c526 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: USB Receiver usb 3-1: Manufacturer: Logitech usb 3-1: configuration #1 chosen from 1 choice input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input8 generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-1/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.1/input/input9 generic-usb 0003:046D:C526.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.1-1/input1 usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: New USB device found, idVendor=0a5c, idProduct=2101 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 4-2: Product: BCM92045NMD usb 4-2: Manufacturer: Broadcom Corp usb 4-2: SerialNumber: 00242CD2A53C usb 4-2: configuration #1 chosen from 1 choice usb-storage: device scan complete SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb USB Serial support registered for GSM modem (1-port) usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0 usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1 usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2 usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems input: Namuga 1.3M Webcam as /devices/pci0000:00/0000:00:10.4/usb1/1-4/1-4:1.0/input/input10 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) usb 2-1: USB disconnect, address 2 option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 usb 2-1: new full speed USB device using uhci_hcd and address 3 hub 2-0:1.0: unable to enumerate USB device on port 1 usb 2-1: new full speed USB device using uhci_hcd and address 4 usb 2-1: New USB device found, idVendor=19d2, idProduct=2000 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: USB ZTE Storage usb 2-1: Manufacturer: Qualcomm, Incorporated usb 2-1: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb 2-1: USB disconnect, address 4 usb 2-1: new full speed USB device using uhci_hcd and address 5 hub 2-0:1.0: unable to enumerate USB device on port 1 usb 2-1: new full speed USB device using uhci_hcd and address 6 usb 2-1: New USB device found, idVendor=19d2, idProduct=0015 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: ZTE CDMA Technologies MSM usb 2-1: Manufacturer: Qualcomm, Incorporated usb 2-1: SerialNumber: Data Interface usb 2-1: configuration #1 chosen from 1 choice scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0 usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1 usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2 usb-storage: device scan complete (HowTos)