4

eth0 dead after power outage, eth1 works but no conection

view full story
linux-howto

http://www.linuxquestions.org – I setup a mythbuntu pc with an onboard card (eth0) so I could watch and listen to movies and music stored on my other pc in the basement. Everything worked fine until we had a power outage. I turned on the pc after the outage and had no networking. I looked and saw no link lights. I verified the network port but plugging in a laptop. I got an ip and able to connect to the internet so the port is not the issue. I plugged in a pci 10/100 card (eth1) and booted up, got link lights, but no networking and not able to even ping the gateway. I setup a static ip in /etc/network/interfaces and added a (HowTos)