4

dial-up problem f17

view full story
linux-howto

http://forums.fedoraforum.org – I have a problem with dial-up internet connection on fedora 17. Unfortunately I live in a rural area where dial-up is my best option. On fedora 16 there was no problem with dial-up. In fedora 17 I used system-config-network to set up the modem and write all the relevant files. I amended the configurations, to allow user control of the modem etc. The configurations that I used were the same as those which worked perfectly for fedora 16, and earlier fedoras. I amended the files: /etc/wvdial.conf /etc/sysconfig/network-scripts/ifcfg-IspProviderName I checked the pap-name and chap-n (HowTos)

nicelinux's picture
Submitted by nicelinux on 06/08/2012 – Made popular on 06/08/2012

Stories similar to dial-up problem f17

Dial-up modem and F15 1 year 1 day ago

I need to use a dial-up modem (land-line style - not blue tooth) in an area where this is the only option.

I managed to get a USR (Model 5637) USB modem to connect with the IP using wvdial and minicom, but have no clue as to how to allow Firefox and Evolution use the connection.

Googling does not seem to bring up anything useful.

Any ideas?

How do I setup PPTP VPN Server 3 years 17 weeks ago

I want to be able to use my Dial-up networking VPN connection on either my windows desktop or Fedora 12 laptop to dial into my network. My server is Fedora 10.

This question is how do I setup the server. I already have the clients configured..

I've tried this, but it looks like its for LPT2 or IPSEC tunnels. I am looking for PPTP (Dial-up)

Thanks!!

I have Cisco router in a remote location. I have attached a modem to the aux port of the router. The problem I am facing is how do I dial the modem's phone number from my computer in my house that uses a cable internet connection?

I do not want the modem connected all the time since the phone line will be used for calls also.

[ubuntu] Always-on dial up 2 years 43 weeks ago

I just installed 10.04-amd64 on this computer and want to have dial-up internet automatically connect as soon as Ubuntu starts. This happened automatically on my previous 8.10 install once I had edited /etc/wvdial.conf . It doesn't do that now.

I've got a Trendnet TFM-560X external serial modem.

How can I get wvdial to run on bootup?

I have a dial-up connection through PeoplePC and I'm running FC11. In order to get my modem working, I'm told I need to install the wvdial package. To get wvdial, I need wvstreams. I downloaded the source for both on my Windows machine, and transferred the .gz files over to my FC partition.

wvdial might also be a workaround, if one does not like to downgrade. In my case, I had to unset my PIN on the SIM card first.

Hi,I just bought a usb modem ZTE MF195, and I am using Aero2 network (Poland).After googling, I found out how to setup this modem to work on Arch, but it only works with wvdial and it doesn't connect with NetworkManager.My config /etc/wvdial.conf:[Dialer Defaults] Modem = /dev/ttyACM0 Init1 = AT+CGDCONT=1,"IP","darmowy" Phone = *99# Carrier Check = yes Stupid mode = yes Us

Connection problem dial up 3 years 18 weeks ago

Hello I installed Fedora 11 Install the modem driver And work with me online But I can not never browsing :DJust contact thank

Attached Files

1.zip (426.6 KB)

Hi Guys I've been using Ubuntu 11.10 on my Work PC, Part of my job occasionally requires me to dial into other machines.

Under Windows I have a wide selection of internal PCI modems/USB Modems and Even a serial modem (That I've never used)

Anyhow, Its part of my day to day tasks and I need that dial up connection.

In days of Old on Ubuntu 7.10 and prior all my modems were auto detected a