1

Cisco Lab Network - 2 routers, 1 switch

view story
linux-howto

http://serverfault.com – I'm building a lab network with some old Cisco gear so that I can properly test the deployment of a Read-Only Domain Controller in a vacuum (no connectivity to our production network). Essentially, I'm building a router on a stick - but I want two different networks on two different routers. Here's my setup: Cisco MC3800 Router - 10.0/16 (IP address: 10.0.0.1) Cisco 2600 Router - 10.1/16 (IP address: 10.1.0.1) Now here's where it gets funky: Cisco 2950 Switch FA0/1 - Trunk Vlan 10 (10.0.0.2 - goes to router 10.0.0.1) FA0/2 - Trunk Vlan 20 (10.1.0.2 - goes to router 10.1.0.1) The rest o (HowTos)