13

Can't use my USB wireless adapter D-link (DWA-131) to work Backtrack5 R1 VMware

view full story
linux-howto

http://unix.stackexchange.com – I have a USB wireless adapter D-Link DWA-131. I also have backtrack 5R1 on Vmware. I installed the driver on the system, and here are some outputs: root@bt:~# lsusb Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 07d1:3303 D-Link System DWA-131 802.11n Wireless N Nano Adapter(rev.A1) [Realtek RTL8192SU] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@bt:~# iwconfig lo no wireless extensions. eth1 no wireless extensions. eth2 no wireless extensions. wlan0 unassociated Nickname:"rtl_wifi" Mode:Auto Access Point: Not-Associated Sensiti (HowTos)

Songlist's picture
Submitted by Songlist on 02/19/2012 – Made popular on 02/19/2012

Stories similar to Can't use my USB wireless adapter D-link (DWA-131) to work Backtrack5 R1 VMware

I recently upgraded my ubuntu server from 10.04 to 12.04. I am trying to use my TL-WN723N V2 wireless USB Adapter. I have added rtl8192cu driver module to /etc/modules so that it can be loaded at boot time. But I am stuck at the basic issue (it seems).

d-link dongle does not work 11 weeks 10 hours ago

hello guys i've been searchin on the web but with no succes so im here

im runnig wheezy with lxde . my dongle get listed when i run lsusb and it gives this then after a few seconds if i type again lsusb i dont see it

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1

Wifi help 3 years 30 weeks ago

Ok i got Fedora 11 installed on my Dell studio 1737 laptop. everything is working great except my wireless card. i have a Dell Wireless 1397, 1510 Half MiniCard and also have the windows driver if needed.

Using another post about wifi, came up with a little more info:

ran /sbin/lspci -nn | grep -i -e network -e wireless:

I just installed Backtrack 5 in Vmware and i'm facing some difficulties with it when trying to connect to a wireless network with my USB wireless dongle.

I am able to start it up with ifconfig wlan0 up. I'm also able to see wireless networks in the wicd network manager, but when trying to connect to one of the wireless networks my wlan0 goes down immediately.

i bought a ProLink WN2001 wireless-N Nano USB Adapter and downloaded the driver file: RTL8188EUS_linux_v4.1.3_5938.20121130 after installed (sudo ./install.sh), still unable to detect the device. please help.

lsusb Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc.

Unable to make connection to Internet using my modem ZTE AC682 UI on Ubuntu 12.0.4 LTS

iwan@iwan-Quadra-NE-1003:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6

how to connect to internet with this modem zte ac682 ui on ubuntu 12.0.4LTS

iwan@iwan-Quadra-NE-1003:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linu

I have wireless keyboard Logitech cordless desktop EX110. Mouse sometimes stops working (sometimes after a few hours working and sometimes after 10 minutes working). I get it back to life by unplugging it from the computer case and then plug it.

Is there a way to do it via console? Maybe by restarting the usb port.

This is the lsusb listing.

Broadcom driver 3 years 24 weeks ago

I have installed Fedora 12 on a Dell computer with an internal Broadcom wifi card. The installation fails to find the card and I don't find it listed among the available drivers. Any suggestions on how I can get the card working? Or, failing that how I can get the Linksys USB radio to work?

Thanks, Phil