1

Bridged networking in KVM

view story
linux-howto

http://askubuntu.com – I'm using ubuntu 10.04 with qemu-kvm installed. I bridged my eth0 to br0. My problem is that The host OS loses connection. Here is my interfaces file auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet dhcp bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 (HowTos)

Songlist's picture
Submitted by Songlist on 05/23/2012

Stories similar to Bridged networking in KVM

On debian squeeze, I setup a bridge based on eth0.

I have debian hosts which are connected through trunk port on 5 different vlans. But this host respond to arp "who-has" requests of all of their differents ip.

I want to use my desktop with a wired ethernet connection (eth0) to operate my USB Wifi Adapter (wlan0) as a non-adhoc access point (so my android can connect to it).

After MUCH searching, I finally found a method that works with about 95% of what I want.

I modified "/etc/network/interfaces" to contain:

auto lo iface lo inet loopback

auto eth0 iface eth0 inet manual

auto br0 iface br0 i

I have an EC2 instance running inside a VPC.

The IP does no longer respond to a remote ping

With restart I mean:

lxc-stop -n vm3 lxc-start -n vm3 -f /etc/lxc/vm3.conf -d

--

/etc/network/interfaces

auto lo iface lo inet loopback up route add -net 127.0.0.0 netmask 255.0.0.0 dev lo down route add -net 127.0.0.0 netmask 255.0.0.0 dev lo

# device: eth0 auto eth0 iface eth0 inet manual

auto br0 iface br0 inet static address 192.22

The IP does no longer respond to a remote ping

With restart I mean:

lxc-stop -n vm3 lxc-start -n vm3 -f /etc/lxc/vm3.conf -d

--

/etc/network/interfaces

auto lo iface lo inet loopback up route add -net 127.0.0.0 netmask 255.0.0.0 dev lo down route add -net 127.0.0.0 netmask 255.0.0.0 dev lo

# device: eth0 auto eth0 iface eth0 inet manual

auto br0 iface br0 inet static address 192.22

I've got ProxmoxVE2.1 ruled KVM node on Debian and bunch of VM's guests machine. That is how my networking looks like:

# network interface settings auto lo iface lo inet loopback

# device: eth0 auto eth0 iface eth0 inet static address 175.219.59.209 gateway 175.219.59.193 netmask 255.255.255.224 post-up echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp

And I've got two

I have to gigabit network interfaces which I have bridged.

/etc/network/interfaces is:

auto lo iface lo inet loopback

# Set up interfaces manually, avoiding conflicts with, e.g., network manager iface eth0 inet manual

iface eth1 inet manual

# Bridge setup auto br0 iface br0 inet static bridge_ports eth0 eth1 address 192.168.88.2 broadcast 192.168.88.255 netmask 255.255.

I'm wondering if I've found a bug in ifupdown, but I wanted to ask here before reporting a bug:

/etc/network/if-up.d/upstart seems to fail to emit static-network-up if any virtual interfaces are defined.