2

AVR isp mkii

view story
linux-howto

http://forums.fedoraforum.org – K so im doing an AVR project. got my little bread board, and the AVR ISP mkii. the damn orange light stop blinking, and is finally green. So i set up Eclipse to use the avrdude stuff. but my question is i keep getting a permission to the devise as restricted. (aka i have to be root). So i know i have to go into /etc/udev/rules.d/....... somewhere and add the permission to one of the rules. After doing some searching on the internet i found that this: Quote: SUBSYSTEM=="usb_device", SYSFS{idVendor}=="03eb", SYSFS{idProduct}=="2104", GROUP="users", MODE="0666" ...is what i need to do, maybe minus the group but esetntially this. so my question is where do i add this line so my little USB device gets the R/W permission i need? Im using FC11 (HowTos)

robot1's picture
Submitted by robot1 on 11/07/2009

Stories similar to AVR isp mkii

kernel_geek wrote:However, if I try to run it as a normal user, I get USB permissions errors.I've added myself to the group plugdev, and tried the following udev rules:ATTRS{idVendor}=="1ed8", SYSFS{idProduct}=="0004", MODE="664", GROUP="pludev" ATTRS{idVendor}=="1ed8", SYSFS{idProduct}=="0005", MODE="664", GROUP="plug

Android MTP 18 weeks 1 day ago

rohan166 wrote:Guys I found this thread --> http://forum.xda-developers.com/showthr … ?t=2055563But I don't have a 51-android.rules in my rules folder.Also, I am having problem at a later stage of the process.Can anyone try it and report results ?Create that file then, but I think the line SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666" is only for HTC

UDEV and openSuse 11.3 2 years 43 weeks ago

Can anyone explain what files control the udev device mapping. I'm trying to get a fresh install of 11.3 to sync a palm pilot with jpilot. I have created a "10-pilot.rules " file in /etc/udev/rules.d containing:

Hi All, I have been having issues where my FTDI devices were not getting assigned the permissions which I put in a custom udev rules file.

I even tried on a fresh install and aplay -l shows the exact same output of my first post here...Anyways the udev rules it installs are:# madfuload.rules - udev rules for loading firmware into M-Audio DFU devices

# Audiophile ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="0763", ATTR{idProduct}=="2803", RUN+="/usr/sbin/madfuload -l -n -f /usr/share/

Am new to Ubuntu and have it installed v11.10 it on my Mac using VirtualBox 4.1.8. Am currently facing an issue, wherein am able to print the documents but not scan the documents. Am using Brother Printer model DCP-7030.

I know it's solved, but I had the same issue today and fixed it like this:Add the following to the "mem" section in /usr/lib/udev/rules.d/50-udev-default.rules:SUBSYSTEM=="mem", KERNEL=="null|zero|full|random|urandom", MODE="0666"

mauriciootta https://bbs.archlinux.org/profile.php?id=58911

2012-07-30T04:43:09Z

Google Nexus 7 and jmtpfs 30 weeks 13 hours ago

Had a problem trying to mount my nexus 7 with jmtpfs.I kept getting errors about permissions denied.Did a lsusb found bus/device numbers and when I do a ls -l /dev/bus/usb/$BUSNUM/$DEVICENUM I noticed that udev was adding as rw/rw root:root.So I added the following file to /etc/udev/rules.d/90-google-nexus-7.rules  ATTR{idVendor}=="18d1", ATTRS{idProduct}=="4e41", MODE=&qu

[lubuntu] Serial port printer 32 weeks 12 hours ago

Hi everyone,

The port does not show up in CUPS after I give permission to the port (chmod 777 /dev/ttyS0) it shows up but after a reboot not any more. I tried to make it permanent by adding the user in uucp, with no luck then added the line KERNEL=="ttyS[0-9]*", NAME="tts/%n", SYMLINK+="%k", GROUP="uucp", MODE="0777" in /etc/udev/rules.d/90-local.