5

[64 bit] The lm-sensors can only detected the CPU temperature sensor

view full story
linux-howto

http://ubuntuforums.org – I have installed lm-sensors, and have used the command 'sensors-detect'. there is the result: # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Gigabyte Technology Co., Ltd. H61N-USB3 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid l (Hardware)

linuxfan's picture
Submitted by linuxfan on 07/19/2012 – Made popular on 07/19/2012

Stories similar to [64 bit] The lm-sensors can only detected the CPU temperature sensor

lm-sensors 2 years 30 weeks ago

OK: Look at this carefully.root@crunchbang:/home/pif# sensors-detect# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)# System: System manufacturer System Product Name# Board: ASUSTeK Computer INC. P5LD2-VM DHThis program will help you determine which kernel modules you needto load to use lm_sensors most effectively.

hi

msi p67a-gd65 rev b3 sandy bridge core i5 ubuntu natty 64bit

Why not detect/show voltages, chipset temp etc? help please..

THANKS!!!

Quote:

# sensors-detect revision 5861 (2010-09-21 17:21:05 +0200) # System: MSI MS-7681 # Board: MSI P67A-GD65 (MS-7681)

This program will help you determine which kernel modules you need to load to use lm_sensors most effectively.

[ubuntu] Sensors error/no info 36 weeks 3 days ago

Hi,

I want to display the sensors info for my new built. Asrock 970 Extrem4, FX-8120, Ubuntu 12.04.

I installed Hardware Sensors Indicator 0.2 with Indicator Applet 0.50 Psensor 0.6.2.16 lm-sensors (I run them separately)

CLI lm-sensors install has been done with the commands

Quote:

Install and Configure lm-sensors

Install the lm-sensors package.

I have a laptop (HP 5310m) released around 2010 and there appears to be no support for the fan/temp sensor chipset.

When I run sensors-detect it comes up with an unknown chip with ID 0x4501.

Does anyone know what this chip is?

If so, is there a module driver being written for it?

Any help appreciated,

Output of sensors-detect:

Some Super I/O chips contain embedded sensors.

Putting lm-sensors into Conky? 2 years 20 weeks ago

HelloDoes anyone know how to edit conky to put in lm sensors detect cpu temps?I do not want to use acpi because alot of people reported problems with it, and I'm used to using lm-sensors anywayMost forum posts on the subject put out answers that don't seem to work for me in Statler (the'yre for Ubuntu or other Oses)I already installed lm-sensors (it came with Statler by default, and

New to Linux and having minor issues :/ . I followed this guide initially but did not recieve the proper output and did not show my ATI Radeon HD 5000 temp or fan speed. Then used this guide, same problems exhibited. No issues installing and no errors. I think its not reading i2c for some reason. The proprietary driver is installed and functioning correctly according fglrxinfo.

sensors-detect does not detect 39 weeks 2 days ago

I am trying to run sensors-detect in Debian6 64 bits and I get:

Sorry, no sensors were detected.

Psensor is a graphical hardware temperature monitor for Linux. It can monitor:

the temperature of the motherboard and CPU sensors (using lm-sensors). the temperature of the NVidia GPUs (using XNVCtrl). the temperature of the Hard Disk Drives (using hddtemp). the rotation speed of the fans (using lm-sensors)

Installation First step is to install lm-sensors: sudo apt-get install lm-sensors Then, s

I noticed that lm_sensors just got updated, running sensors-detect is pretty slow on some of my machines. Is it necessary to re-run sensors-detect each time the kernel or lm_sensors is updated or is that unneeded?