4

11.3 & Trying To Install PCMCIA card - WG511T

view full story
linux-howto

http://forums.opensuse.org – I was trying to get a card to work well with linux. I searched compatibility lists and found the NetGear WG511T to appear good. I got one and when I insert the device, Linux never sees it. In Windows, it appears like normal and drivers install. In OpenSUSE 11.3, the device is never recognized; no lights turn on, not listed under iwconfig, or networkmanager. I've installed the madwifi drivers, but they dont help since the computer never sees the device itself (to install drivers). Is there anything special I need to do to get the device recognized by the system? Thanks, (Distributions)

qq124's picture
Submitted by qq124 on 09/05/2010 – Made popular on 09/05/2010

Stories similar to 11.3 & Trying To Install PCMCIA card - WG511T

Netgear Wireless Card 2 years 19 weeks ago

I just replaced my EDUP 802.11b/g card, which was damaged but still working, with a Netgear WG511T This card claimed to double the speed (SuperG), to 108 Mb/s ... after getting the card, I looked up the info, and found that the drivers to do that only worked in Windoze XP or higher.

Does anyone know of Linux drivers for this card?

I've got an Huawei HiLink E303 USB G3-internet dongle that I'd like to use to connect to the internet. I'm using Arch Linux. According to this page, the Linux drivers are actually on the device and can be installed relatively easy, including on Arch. However, I am not able to actually mount this device, and can therefore not extract the drivers.

New TF700T not showing in adb? 38 weeks 10 hours ago

Hey everyone,

I've read through the All-In-One guide about how to root the TF700T, downloaded the driver pack, put it into developer mode and enabled unknown sources.

I have a system on which RHEL6 is installed. I need to install proper graphic drivers. I checked my graphic card simply by this command

#lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Device 0162 (rev 09) (prog-if 00 [VGA controller])

When I searched its drivers I found this (01.org/linuxgraphics/)link. But I don't know which drivers to choose and how to install them.

[ubuntu] graphics card drivers 3 years 33 weeks ago

i have a Matrox G45FMDVP32DB Millennium G450 Video Card

So I found an old TV Tuner, Sony BTF-pa402z. I plugged it in, and tried it in a MythTV and it is not recognized.

Tried to get Windows drivers and install them, and it says smrt_m is installed but it sometimes says Yes or No to Hardware Present.

So, I downloaded the latest drivers, and had older versions as well of the Ralink linux drivers. I changed the header file so that it recognized my USB device and all. However, even though I can get it to setup an ra0 device, it does not work in Suse 11.2 or 11.1 What happens is that I get a panic message when I do a service network start.

I have a GT 19300 v4.1.2 and all was well until a week or so ago.

W7 64-bit

Now when I connect the phone to my PC (W7) the system sees it and tries to install drivers but then gives a message saying the it failed to install them.

Device manager now shows my phone as an unknown device and it didn't before.

I don't think this is a cable or a Kies problem, because I've installed and unins

Guys i bought i new computer it has Windows 7x64, and i've installed the latest flashtool, installed the drivers in it. In flashtool the device is recognized, but when i try to flash a kernel it says USB device is not recognized or flashtool will start to flash and stops at checking header... I've installed all the drivers and i don't know what to do. Any help is appreciated.