4
[all variants] Lan pc cannot be detectedview story

http://ubuntuforums.org – I am new in ubuntu and i have a problem with detecting PC in LAN. I have installed ubuntu 1(lucid lynx)10.4 to four PCs in our school. I have connected it to router. All four PCs can connect and browse internet but cannot detect each one in the local network. I have edited already the network connections. Each one has unique IP address. (HowTos)

4
[ubuntu] nfs share will not auto mount with fstab, rc.local or autofsview story

http://ubuntuforums.org – Hi all, I have left the Ubuntu forums as a last resort but have now been researching this problem for a week to no avail. I can mount my nfs share on client manually after login with the following command but cannot mount nfs share via fstab, rc.local or autofs. manual mount after login Code: sudo mount 192.168.1.1:/home/ben/BensShare /home/ben/NFSShare fstab entry Code: 192.168.1.1:hom (HowTos)

5
[64 bit] eth0 spontaneously disappearsview story

http://ubuntuforums.org – For a long time my wired internet connection has been spontaneously disappearing. (HowTos)

5
[ubuntu] Wired ethernet connection problemview story

http://ubuntuforums.org – I have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. (HowTos)

6
[ubuntu] Connection...no connectionview story

http://ubuntuforums.org – I am connecting to a non-secured wireless network, and the connection is fine, yet when I open my internet browser the pages will not load. It is as if there is no internet connection. The internet connection was working perfectly fine a week ago. thanks (HowTos)

3
broadcast a radio station on my websiteview story

http://www.linuxquestions.org – Hello everyone, i want to play a specific radio station (which broadcasted on a specific website) on my website too, so, what are the softwares that i should use for this situation ?? (HowTos)

4
Nvidia 8800GTS fan settingsview story

http://www.linuxquestions.org – I added the Nvidia Repo, installed the 260 driver, but I noticed the temp is like 83c. How can I change the fan settings to 60% like it is under windows? Opensuse 11.3 x64 KDE (HowTos)

6
Packets go out one tunnel, come back another, then are droppedview story

http://www.linuxquestions.org – I’ve run into a of a routing issue pertaining to packets leaving a firewall, traversing and IPSec tunnel, hitting the target and then returning via a different tunnel, finally arriving back on the source firewall but on a different interface from where it started. Once the packet has returned to the firewall it is dropped… I’ve been unable to discover the reason for the drop. (HowTos)

3
Post your favourite background here.view story

http://www.linuxquestions.org – http://www.linuxwallpapers.org/linux/tux-silver.jpg (HowTos)

4
LXer: TCP PAWS Explained.....view story

http://www.linuxquestions.org – Published at LXer: One of the fundamental question, which TCP answer is the Protocol suited for higher transmit rate. So how fast a TCP can go? What all the performance and reliability issues with TCP as transfer rate goes up and up. PAWS (Protection Against Wrapping Sequence) is one such consequence as the network bandwidth goes up. (HowTos)

6
Interactive Linux Kernel Map Updatedview story

http://www.linuxquestions.org – I stumbled across the Interactive Linux Kernel Map Facebook page some while ago, joined it, then promptly forgot about it. (HowTos)

4
Need advice with Synclientview story

http://www.linuxquestions.org – Howdy: Running Ubuntu 10.04 on Dell Inspiron. I use synclient to adjust the tapping on the touchpad. Two minor problems: 1. It's set to FingerLow=10 FingerHigh=15. I need to set it to 30-35 respectively. I can't right off set it to that. I have to set it to 15-20, and then 20-25, and then 25-30, and then 30-35. I have to creep up on it. What's causing that? 2. (HowTos)